Filter Results
Rivet Material
Rivet Finish
Body Dia
Min Grip
Max Grip
Body Length
Head Style
Specs Met
Blind Rivets

Blind Rivets

Also known as pop rivets, blind rivets are used to permanently fasten materials through punched or pre-drilled holes where you have access to only one side of the hole. They're also used when the force required to install another type of rivet might damage the materials being fastened.

Use a blind rivet tool (sold separately) to set the rivet.

Dome Head

Also known as round head rivets, these give a finished look with a smooth head that arches above the surface.

Plain Steel

332 in Body Dia

18 in Body Dia

532 in Body Dia

316 in Body Dia

14 in Body Dia

Zinc Plated Steel

332 in Body Dia

18 in Body Dia

532 in Body Dia

316 in Body Dia

14 in Body Dia

516 in Body Dia

Stainless Steel

18 in Body Dia

532 in Body Dia

316 in Body Dia

14 in Body Dia

Aluminum

164 in Body Dia

332 in Body Dia

18 in Body Dia

532 in Body Dia

316 in Body Dia

14 in Body Dia

Copper

18 in Body Dia

Plastic

316 in Body Dia

14 in Body Dia

38 in Body Dia

6 mm Body Dia

6 516 mm Body Dia

Truss Head

The large flange at the base of the head spreads out the fastening force of these rivets. Good for use in oversized holes and soft or brittle materials.

Zinc Plated Steel

18 in Body Dia

316 in Body Dia

14 in Body Dia

Stainless Steel

18 in Body Dia

316 in Body Dia

Aluminum

18 in Body Dia

532 in Body Dia

316 in Body Dia

Countersunk Head

Countersunk heads install flush with workpiece surfaces.

Plain Steel

18 in Body Dia

Zinc Plated Steel

18 in Body Dia

Stainless Steel

18 in Body Dia

Aluminum

18 in Body Dia

316 in Body Dia

Zinc Plated Aluminum

316 in Body Dia

14 in Body Dia

Closed End

Also known as sealing rivets, closed-end blind rivets form an air- and water-tight seal when installed.

Countersunk Head — Aluminum

18 in Body Dia

Dome Head — Aluminum

18 in Body Dia

532 in Body Dia

316 in Body Dia

14 in Body Dia

Structural

Handle heavier shear and tensile loads with these structural rivets. They're commonly used in automotive and aircraft production and applications where vibration is a concern. Their smooth round head sits above the surface for a finished look.

Plain Steel

316 in Body Dia

14 in Body Dia

Stainless Steel

316 in Body Dia

14 in Body Dia

Aluminum

316 in Body Dia

14 in Body Dia

Tri-Bulb

These rivets form a large grip surface on the blind side of the rivet for extra holding power. They have a slotted shaft that spans out into three legs, or bulbs, upon installation. Good for use in oversized holes and soft or brittle materials.

Dome Head — Aluminum

14 in Body Dia

316 in Body Dia

Truss Head — Aluminum

316 in Body Dia

532 in Body Dia

Washers

Support rivets in oversized holes and soft or brittle materials with these rivet washers. Also called back-up washers.

Plain Steel

Zinc-Plated Steel

Plain Aluminum