Filter Results
Inlet Pipe Size
Overall Depth
Handle Type
Inlet Type
Max Operating Pressure
Bolt Circle Diameter
Bolt Hole Diameter
OD
Handle Length
Centrifugal Pump Valves

Centrifugal Pump Valves

Control liquid flow through your system using these valves. They are commonly installed before and after the centrifugal pump to help shut off flow for pump maintenance or replacement, or to help prevent backflow.

Flanged Ball Valves

Install one of these flanged ball valves before and after the pump in your line to help ease pump maintenance and replacement. Their flanged design creates a secure, stable connection in your line. These valves can also help prevent galvanic corrosion and electrolysis, as well as reducing potential leak points.

3-Way Flow — Lever Handle

Brass Chrome Plated Body

NPT Connection

SWT Connection

Flanged Ball Valves with Drain

Featuring a high-flow hose drain, install these valves above the pump in your system to fully drain the fluid before removing the pump for maintenance or replacement. They drain fluids in the system from below using the power of the pump, and from above using gravity. Simply attach a hose to the drain to provide a path for the fluid. Their flanged design creates a secure, stable connection in your line. These valves can also help prevent galvanic corrosion and electrolysis, as well as reducing potential leak points.

3-Way Flow — Lever Handle

Brass Chrome Plated Body

NPT Connection

SWT Connection

Rotating Flanged Ball Valves

Provide easy maintenance access to your pump by choosing a rotating flange ball valve. Their design allows the pump to be turned while still in line so they can be reached even if the pump is blocked by piping or equipment. They have flush inner and outer flanges that can help stop the damage caused by over-torquing, as well as creating a secure, stable connection in your line. These valves can also help prevent galvanic corrosion and electrolysis, and also reduce potential leak points.

3-Way Flow — Lever Handle

Brass Chrome Plated Body

Rotating Flanged Ball Valves with Drain

These valves include a high-flow hose drain that allows you to fully drain your system's fluid before removing the pump for maintenance or replacement. They drain fluids in the system from below using the power of the pump, and from above using gravity. Simply attach a hose to the drain to provide a path for the fluid. Their rotating flanged design allows the pump to be turned while still in line so they can be reached even if the pump is blocked by piping or equipment. They have flush inner and outer flanges that can help stop the damage caused by over-torquing, as well as creating a secure, stable connection in your line. These valves can also help prevent galvanic corrosion and electrolysis, as well as reducing potential leak points.

3-Way Flow — Lever Handle

Brass Chrome Plated Body

Flanged Check Valves

Install these heavy-duty flanged check valves in your system to prevent discharge backflow from occurring as a result of the centrifugal pump's suction. They are often used with pumps in industrial and agricultural applications, such as liquid transfer, irrigation, and dewatering.

NPT Connection

Rotating Flanged Check Valves

Install these check valves between your pump and ball valve to help prevent the pump's suction from causing discharge backflow. They have a 360° rotating flange for easy installation in your line, and are commonly used in hydronic systems with a glycol mixture or water.

Brass Body

Flanged Connection