Filter Results
Input Horsepower
Maximum Flow Rate
Maximum Head
For Use With
Motor Type
Voltage
Inlet Pipe Size
Outlet Pipe Size
Inlet Pressure
Maximum Specific Gravity
Magnetic Drive Chemical Pumps

Magnetic Drive Chemical Pumps

Help prevent leaks and eliminate the hassle and cost of maintaining and replacing mechanical shaft seals by using one of these sealless magnetic drive pumps. They rely on magnets to turn the impeller instead of the motor's shaft extending inside the pump, removing potential leakage points. These pumps also feature a close-coupled design for easy installation, and have a rear pull-out for maintenance of the motor and impeller. Often used in chemical and power plants as well as wastewater treatment facilities, they are typically used with low-viscosity fluids that contain no solids.

Straight

These versatile pumps have a compact design to easily fit in your system. They are highly efficient and corrosion-resistant to handle a variety of chemicals.

Thermoplastic Housing

Induction Motor — (TEFC) Totally Enclosed Fan Cooled Motor Enclosure

115/208/230V AC

208/230/460V AC

Flooded Suction

Quickly get the fluids flowing through your system with these flooded suction pumps. These gravity-style pumps require a reservoir filled with fluid that sits above the pump, continuously feeding the pump with liquid so no priming is required. They are compatible with electronic, pharmaceutical, plating, and some chemical applications in which there must not be a delay after the system is turned on.

Thermoplastic Housing

Induction Motor — (TEFC) Totally Enclosed Fan Cooled Motor Enclosure

115/208/230V AC

208/230/460V AC

PSC Motor — (TEFC) Totally Enclosed Fan Cooled Motor Enclosure

115V AC

Self-Priming

Ideal for use when dry run protection is required, these self-priming pumps hold on to fluid when the pump is shut off for quick repriming, and remove air from the pump's suction line without additional external equipment. They are commonly used to transfer corrosive chemicals from bulk storage containers, rail cars, tanker trucks, sumps, and reservoirs, as well as in over-the-wall applications and in pipes that can have trapped air.

Thermoplastic Housing

Induction Motor — (TEFC) Totally Enclosed Fan Cooled Motor Enclosure

115/208/230V AC

208/230/460V AC