Filter Results
Input Horsepower
Max Flow Rate
Max Head
Max Head Pressure
Housing Material
Phase
Voltage
Service Factor
Max Fluid Temp
Max Solid Diameter
Inlet Pipe Size
Multistage Booster Pumps

Multistage Booster Pumps

Install one of these multistage centrifugal booster pumps when higher water pressure is needed in your fluid transport system. They can provide more pressure than single-stage booster pumps, making them an excellent choice to increase water supply in hilly residential areas and in tall commercial buildings, as well as in washdown, irrigation, filtration, reverse osmosis, and pressure cleaning applications. They are powered by an integrated electric motor and have two or more impeller chambers in series. Each chamber increases the pressure without changing the flow rate for a given rotational speed.

General Purpose

Increase the supply pressure for spray systems, water circulation, pressure cleaning, and a variety of other applications with these centrifugal pumps.

Continuous Duty — Cast Iron Housing

1 Phase — 115/230V AC

1 Phase — 230V AC

3 Phase — 208-230/460V AC

Continuous Duty — Stainless Steel Housing

1 Phase — 115V AC

1 Phase — 230V AC

3 Phase — 208-230/460V AC

High Head

Install these pumps in HVAC, chemical processing, liquid transfer, and hot or cold water systems where high head is required.

Continuous Duty — Cast Iron Housing

1 Phase — 115/230V AC

3 Phase — 230/460V AC

High Volume

Use these pumps for industrial and agricultural applications that require high flow rates.

Continuous Duty — Cast Iron Housing

1 Phase — 115/230V AC

3 Phase — 115/230V AC

3 Phase — 208-230/460V AC

In-line Vertical

Use these pumps for boosting the pressure of clean water for applications such as municipal well-based water supplies, boiler feeds, and filtration systems. Their compact, vertical design has a smaller footprint than horizontal pumps, allowing for installation in tight spaces, and the motors are rated for continuous duty.

Continuous Duty — Cast Iron Housing

3 Phase — 208-230/460V AC

1 Phase — 115/208-230V AC

Continuous Duty — Stainless Steel Housing

3 Phase — 208-230/460V AC

1 Phase — 115/208-230V AC

1 Phase — 230V AC

Horizontal

Commonly used in indoor applications due to their low-headroom design, horizontal pumps provide easier installation and better maintenance access to internal parts than in-line vertical pumps.

Continuous Duty — Cast Iron Housing

1 Phase — 115V AC

1 Phase — 230V AC

3 Phase — 208-230/460V AC

For Multifamily Dwellings

Maintain constant pressure from water storage and cistern systems with these pumps, which have a built-in electronic pressure sensor for real-time regulation of water pressure under changing demand. They are small enough to fit in small spaces, such as between floor joists.

Continuous Duty — Stainless Steel Housing

1 Phase — 230V AC