Filter Results
Input Horsepower
Max Flow Rate
Tank Capacity
Voltage
Current
Wattage
Max Operating Temp
Impeller Material
Pump Housing Material
Number of Inlets
Includes
Standard Condensate Pumps

Standard Condensate Pumps

Prevent draining condensate from causing damage to walls or floors by installing these pumps that collect the liquid and pump it to an appropriate drainage point. Use with equipment such as high-efficiency gas furnaces, condensing boilers, or air conditioning units, where gravity doesn't allow the condensate to naturally drain.

Small Reservoir

Use these pumps when you need to remove small amounts of fluid from equipment that produces little condensate. The check valve and oil-resistant tank are removable, and the rubber feet absorb shock when installed on hard surfaces.

Thermoplastic Housing — Polypropylene Impeller

115V AC — 1.5 A

230V AC — 0.5 A

Medium Reservoir

Suitable for condensate collection with larger equipment or when condensate does not need to be immediately removed, these pumps feature a high-impact polymer base, a stainless steel shaft, and an ABS plastic tank cover and switch housing.

Thermoplastic Housing — Polypropylene Impeller

115V AC — 1 A

115V AC — 1.2 A

115V AC — 1.5 A

115V AC — 1.6 A

230V AC — 0.5 A

Large Reservoir

Ideal for systems with high-flow drainage or for reducing pump cycling times, these pumps have a large, approximately 1-gallon tank capacity. They have a galvanized steel cover and a rugged plastic or aluminum housing to resist corrosion in most environments.

Aluminum Housing — Nylon Impeller

115V AC — 3.5 A

Thermoplastic Housing — Polypropylene Impeller

115V AC — 1 A

115V AC — 2.5 A

115V AC — 3.5 A

120V AC — 3.5 A

230V AC — 1 A

230V AC — 1.2 A

230V AC — 2.5 A

Low Profile

Install these pumps with a compact design when space is limited, such as where the incoming drain line is too low to be compatible with other condensate pumps. Thermal overload protection prevents damage to the pump when the temperature rises above operating conditions.

Thermoplastic Housing — Polypropylene Impeller

115V AC — 1.5 A

230V AC — 0.5 A

Submersible

Designed to be submerged in condensate tanks, these highly-efficient pumps typically use less energy than non-submersible pumps as they don't require the energy to move fluid up through the pump. They also help prevent pump cavitation in systems where there is a high elevation difference between the pump and the fluid surface. While these pumps can also be used on the outside of tanks, they feature sealed motor housings to keep water out if submerged. Oil-filled for lifetime lubrication and excellent heat dissipation, the housing include float-operated mechanical switches.

Aluminum Housing — Nylon Impeller

115V AC — 1.1 A

115V AC — 1.7 A

Ice Machine

Collect and drain water created during the ice-making cycle or from ice melts in the storage bin to protect your floor from damage. Use when a floor drain isn't available.

Thermoplastic Housing

115V AC — 1 A