Filter Results
Material
Finish/Coating
Thread Size
Fasteners for Structural Framing Extrusions

Fasteners for Structural Framing Extrusions

Assemble extruded framing structures with these fasteners.

T-Nuts

Use T-nuts to secure brackets, base mounts, and other components to your framing system when you have access to the open end of the extrusion. Just pass the screw through the component you are installing and into the T-nut to secure the component in place.

One Screw Mount

Zinc Plated Steel

Black Zinc Plated Steel

Black Zinc

Stainless Steel

Two Screw Mount

Black Zinc Plated Steel

T-Anchors

Install these anchors to firmly hold two extrusions together at a right angle. Machine two holes to install the fastener into the side of one extrusion, then slide the second extrusion onto the fastener and tighten.

Zinc Plated Zinc

Zinc

Drop-In Nuts

Choose these drop-in nuts for securing components to your framing system when you don't have access to the open end of the extrusion. Drop the nut through the T-slot, then install the component with a screw.

Zinc Plated Steel

Black Zinc Plated Steel

Wing Nuts

Secure two extrusions at a 90° angle using these wing-shaped nuts, which don't require additional machining. Install the fastener into the center hole at the end of one of the extrusions, then slide the T-slot of the mating extrusion through the nut to secure the joint.

Black Zinc Plated Steel