These lubricators prevent over or under oiling by providing a consistent supply of oil to bearings, gears, shafts, and other machine parts. When the oiler is filled, gravity pulls the oil through pipe or tubing onto the necessary part. These dispensers can be configured to lubricate multiple parts.
Good for general use, these oilers have a reservoir with a self-closing cap for easy access as well as a vent to minimize contamination. They can be disassembled for easy cleaning.
Direct Pipe Thread
Remote Bracket with 100 Mesh Stainless Steel Filter
Adjustable Drip with Manual Flow Control
Also known as drip-feed oilers, these oilers allow you to control the flow rate with the turn of a knob. Use the sight glass to verify the flow rate. Stop or start flow with the top-mounted toggle.
Direct Pipe Thread
Full Flow with Manual Flow Control
These oilers provide a full flow of lubricant and can be configured with additional tubing, pipe valves, and other accessories to act as a central reservoir for a gravity-feed lubrication system. A top-mounted toggle stops and starts oil flow.
Adjustable Drip with Automatic Flow Control
Wire the solenoid valve to your machinery so lubricant only flows when the equipment is on. Also known as drip-feed oilers, these oilers use a needle valve to precisely control the amount of oil being released. Use the sight glass to verify the flow rate.
Remote Bracket Mount Type
Full Flow with Automatic Flow Control
A solenoid automatically turns flow on when your machine is running and turns it off when your machine is shut down. These oilers provide a full flow of lubricant and can be hooked up to manifolds, metering valves, and brushes to create a centralized lubrication system.
Flow Control Valves
Needle valves allow you to control the flow of oil from your oil reservoir. They provide precise volume flow adjustments to ensure that the correct amount of lubricant is dispensed, and a sight glass allows you to visually monitor the flow.