Filter Results
Qty
For Use On (Best)
Drill Dia
Shank Type
Overall Length
Carbide Tipped Drill Bits

Carbide Tipped Drill Bits

Drill through tough materials such as concrete and brick with one of these carbide tipped drill bits. Carbide tipped tools offer the strength and wear resistance of carbide steel on just the cutting edge. Choose between fast spiral bits for drilling into softer or more brittle materials such as block and brick, slow spiral bits for drilling into harder surfaces such as concrete, or regular spiral bits for drilling into a wide range of materials. The bits may have 2, 3, or 4 cutting edges at the tip. Drills with more cutting edges produce less vibration than drills with fewer cutting edges and offer better drilling performance and hole quality in harder materials.

Round Shank Drill Bits for Portable Drills

Insert these bits into the 3-jaw chuck of a regular handheld drill. The most common shank style, round shank drill bits provide more accurate centering than hex shank or 3-flat shank bits, but must be tightened in the chuck to keep from slipping. These drill bits should not be used with hammer-action drills.

Spiral

Slow Spiral

Round Shank Drill Bits for Hammer Drills

The most common shank style, round shank drill bits provide more accurate centering than hex shank or 3-flat shank bits, but must be tightened in the chuck to keep from slipping. These bits can be inserted into a hammer drill with a 3-jaw chuck.

2-Cutter Cutting Head Type

U-Flutes

Hex Shank Drill Bits for Hammer Drills

Bits with a hex shank provide maximum surface contact with a drill chuck to prevent slipping and withstand higher amounts of torque than a round shank bit. These drill bits can be inserted into a hammer drill with a 3-jaw chuck.

Hex Shank Type

3-Flat Shank Drill Bits for Hammer Drills

These bits have a 3-flat shank and can be used in hammer drills with a 3-jaw chuck. Bits with a 3-flat shank are better suited for high-torque applications than round shank drill bits.

2-Cutter Cutting Head Type

SDS Plus Shank Drill Bits for Rotary Hammer Drills

Cutting tools with this shank style can only be used in drills with a compatible SDS Plus chuck, which is spring loaded to absorb heavy impact and vibration. The SDS Plus shank prevents the bit from slipping in the chuck, improving drilling performance in high-torque applications. Bits with an SDS Plus shank can be changed with one hand for more efficient drilling.

2-Cutter Cutting Head Type

4-Cutter Cutting Head Type

SDS Max Shank Drill Bits for Rotary Hammer Drills

An SDS Max shank prevents these bits from slipping in the chuck, allowing these drill bits to be used for high-torque applications. Bits with this shank style can only be used with tools with a compatible SDS Max chuck, which is spring loaded to absorb heavy impact and vibration. Bits with an SDS Max shank can be changed with one hand for more efficient drilling.

2-Cutter Cutting Head Type

4-Cutter Cutting Head Type

Spline Shank Drill Bits for Rotary Hammer Drills

For use in rotary hammer drills with a spline drive chuck, these drill bits have a spline shank with twelve teeth that fit into a compatible spline drive chuck to prevent the bit from slipping in high-torque applications. The bit is held in place with a retaining pin, further improving stability.

2-Cutter Cutting Head Type

4-Cutter Cutting Head Type

Sets

Containing multiple carbide-tipped concrete and masonry drill bits in a range of sizes and styles, these sets make sure you're ready to drill through the most demanding materials.

Round Shank Type

SDS Plus Shank Type

Screw Installation Sets

Install concrete and masonry anchors quickly and efficiently with these multitool sets. All sets contain a drill/drive sleeve, a drill bit, a nutsetter, and a drive bit. Some sets have multiple drill bits, nutsetters, and drive bits in different sizes for improved versatility. The drill/drive sleeve slides over the bit and screw for improved stability during installation, and it has a built-in collar that acts as a depth stop for drilling multiple holes of the same depth.