Filter Results
Shank Diameter
Finish/Coating
Small Solid Carbide Turning Bars

Small Solid Carbide Turning Bars

Produce bores, grooves, and threads on the inside of a workpiece with these turning bars. Also known as boring bars, they have a single cutting tip at the end of a shank, which attaches to a lathe. Made from solid carbide, they provide good wear resistance at high speeds but require rigid toolholding because they may be brittle.

Radius Boring

Machine small bores with radiused corners.

Bright (Uncoated) — Carbide

Inch

18 in Shank — 0.003 in to 0.005 in Radius

316 in Shank — 0.005 in to 0.008 in Radius

14 in Shank — 0.005 in to 0.008 in Radius

38 in Shank — 0.005 in to 0.008 in Radius

Sharp Corner Boring

Cut small bores with sharp corners with these boring tools.

Bright (Uncoated) — Carbide

Inch

316 in Shank

14 in Shank

38 in Shank

Retaining Ring Grooving

Use these tools to create square-corner grooves for seating retaining rings.

Bright (Uncoated) — Carbide

Inch

14 in Shank

516 in Shank

38 in Shank

12 in Shank

Full Radius Grooving

Cut internal grooves with straight sides and a full radius.

Bright (Uncoated) — Carbide

Inch

516 in Shank

Face Grooving

Make face grooves with these tools.

Bright (Uncoated) — Carbide

Inch

14 in Shank

Internal Threading

Create internal threads using these cutting tools.

Bright (Uncoated) — Carbide

Inch

316 in

14 in

516 in

38 in

12 in