Filter Results
For Rope Diameter
Finish/Coating
Material
Wire Rope Sleeves, Clips, & Thimbles

Wire Rope Sleeves, Clips, & Thimbles

Adapt wire rope for a variety of applications by adding these sleeves, clips, and thimbles to create eye loops or terminations.

Oval Sleeves

Create eye loops or lap splices in wire ropes with these oval sleeves, also known as ferrules, swage sleeves, or compression sleeves. Installing these sleeves using a swaging tool enables them to bear the full load capacity of the wire rope.

Copper Sleeves — For Galvanized Steel Wire Rope

Zinc-Plated Copper Sleeves — For Galvanized Steel Wire Rope

Tin-Plated Copper Sleeves — For Galvanized Steel Wire Rope

Nickel-Plated Copper Sleeves — For Stainless Steel Wire Rope

Stainless Steel Sleeves — For Stainless Steel Wire Rope

Stop Sleeves

Use these stop sleeves, also called stop buttons, to terminate wire ropes and secure their ends.

Copper Sleeves — For Galvanized Steel Wire Rope

Aluminum Sleeves — For Galvanized Steel Wire Rope

Zinc-Plated Copper Sleeves — For Galvanized & Stainless Steel Wire Rope

Stainless Steel Sleeves — For Stainless Steel Wire Rope

U-Bolt Clips

Create loops at the ends of wire ropes to make connecting points, or for splicing with these U-bolt clips. Also called wire rope clamps, these clips consist of a saddle, U-bolt, and securing nuts. The clip saddle cradles the long (live) end and the U-bolt circles the short (dead) end of the rope for a proper grip. The number of clips needed depends on the size and construction, or the application required of the rope.

Galvanized Malleable Iron

Galvanized Forged Steel

Stainless Steel

Double-Saddle Clips

Create loops on wire rope ends for tie-downs and other applications using these double-saddle clips, also called fist grip clips. These clips don't rely on crushing action between the long (live) and short (dead) ends of the rope, allowing quicker and easier installation than with U-bolt clips since orienting the ends isn't necessary.

Galvanized Forged Steel

Thimbles

These wire rope thimbles line the inside surface of wire rope eye loops, reinforcing the loop's structure and guarding against wear on connection points for a longer service life.

Zinc-Plated Steel

Galvanized Steel

Stainless Steel

Eye Loop Fitting Kits

Form an eye loop at the end of a wire rope using these kits which include thimbles and either sleeves or clips to secure the end of the loop. Thimbles line the inside surface of wire rope eye loops, reinforcing the loop's structure and guarding against wear on connection points for a longer service life.

Two Loops with Sleeves

Thimble (Galvanized Steel) & Sleeves (Aluminum)

Thimble (Stainless Steel) & Sleeves (Tin-Plated Copper)

Single Loop with Clips

Thimble & Clips (Galvanized Steel)

Thimble & Clips (Stainless Steel)

Thimble & Clips (316 Stainless Steel)