Filter Results
Type
Pipe Size
Specifications Met
Chrome-Plated Brass Pipe Fittings

Chrome-Plated Brass Pipe Fittings

Get better durability and corrosion resistance than with standard brass fittings using these chrome-plated brass fittings. These fittings carry compatible liquids and air in low-pressure applications and are also known as Class 125 fittings. They have a shiny, polished exterior for a finished look and are often used in plumbing applications in schools, hospitals, and bathrooms.

90° Elbows

Use 90° elbow fittings to make a sharp, perpendicular change in the direction of flow in your system where a small loss of flow pressure is not a problem. They are similar to 90° street elbow fittings, except they have two female ends to connect to male pipe ends or fittings.

90° Street Elbows

Make a sharp, perpendicular change in the direction of flow in your system where some loss of flow pressure is not a concern with these 90° street elbow fittings. Unlike standard 90° elbow fittings, street elbow fittings have a female end and male end, so they can accept both male and female pipe ends and fittings.

45° Elbows

Add a 45° elbow fitting to your pipe ends for a more gradual flow direction change in your system than with a 90° elbow fitting. These fittings also restrict pipe flow less than elbows and have two female ends for connection to male pipe ends and fittings.

45° Street Elbows

Install these 45° street elbows to get a more gradual change in the direction of flow of your system than with 90° elbows. They also restrict pipe flow less than elbows with a greater degree of bend. Unlike 45° elbow fittings, these 45° street elbow fittings have one female end and one male end, so they can accept both male and female pipe ends and fittings.

Tees

Combine, change, or divide the flow of materials through pipes with the same diameter using these tee fittings. They have three female threaded ports that accept male threaded pipe ends and fittings.

Hex Bushings

Tighten or loosen these hex bushings by turning the hex head with a wrench, which allows you to take apart the pipe for maintenance with less disruption to your system than with face bushings. They have a different pipe size on each end to connect a larger diameter pipe to a smaller diameter pipe and have both internal and external threads to accept a male and a female pipe end or fitting.

Face Bushings

Face bushings help you achieve a close fit when connecting pipes with different diameters. They are fully threaded both internally and externally to connect a male threaded pipe to a female threaded pipe.

Couplings

Join pipes of the same diameter with couplings to create longer pipe or extend your pipe run. They feature two female threaded ends for connecting with two male threaded pipe ends or fittings.

Reducing Couplings

Connect pipe with a larger diameter to a pipe with a smaller diameter to reduce the size of the pipeline using these reducing couplings. They have two female threaded ends for connecting with two male threaded pipe ends or fittings.

Locknuts

Lock together two threaded fittings on your pipe with these locknuts. Adding a locknut to a joint increases the joint's stability and reduces the effect of vibrations, which can loosen the fittings and cause the pipe to fail. They are hex shaped, which allows you to tighten or loosen with a standard wrench.

Unions

Unscrew the nut on these union fittings with a standard wrench to install, remove, clean, or maintain pipe sections with less disruption to your system than threaded fittings that require full pipe rotation to remove. They have a hex-shaped nut, a threaded female end, and a threaded male end.

Caps

Stop or direct the flow of material in your pipe system and protect external threads on pipe ends and fittings using these caps. Unlike plugs, they are installed on the outside of a pipe end.

Square-Head Plugs

Screw one of these threaded plugs with square heads inside the female end of a pipe or fitting to block material flow or to redirect flow in fittings with multiple heads, such as wyes or tees. Use a compatible socket wrench to install.