Filter Results
Input Voltage
Load Capacity
Stroke Length
Mount Type
Commercial-Duty Rod-Style Electric Actuators

Commercial-Duty Rod-Style Electric Actuators

The internal limit switch on these electric actuators helps prevent overload and can be adjusted for precise positioning. Designed for low duty cycles in commercial environments, these rod-style actuators have external rods that deliver thrust to push or pull loads. They're often used in place of hydraulic or air cylinders because they allow more precise positioning, run more quietly, and don't contain potentially hazardous fluids, but they're not suited for hazardous environments or continuous operation applications.

The duty cycle rating is the amount of time per operating cycle at the rated load that the actuator spends extending and retracting ("on" time) versus the time it rests ("off" time). Typically expressed as a percentage of "on" time, a duty cycle of 33% for a 60 second cycle would spend 20 seconds on and 40 seconds off.

Male Clevis Mount

Use clevis pins to mount these male-threaded actuators.

115V AC

450 lb Load Capacity

560 lb Load Capacity

675 lb Load Capacity

Female Clevis Mount

Mount these female-threaded actuators with clevis pins.

115V AC

675 lb Load Capacity

12V DC

675 lb Load Capacity

Pipe & Rod-End Mount

These actuators have a pipe mount on their housing and a spherical rod-end on their extension tube for quick mounting.

115V AC

660 lb Load Capacity