Filter Results
Bore Dia
Stroke Length
Rod Dia
Cushion
Overall Length
Rod End Thread Size
Magnetic Piston
Double-Acting Cylinder

Double-Acting Cylinder

Powering both the instroke and outstroke makes these cylinders ideal for pushing and pulling within the same application. They also allow you to control the exhausting back pressure for superior speed control.

Nose Mount

Pass the threaded nose of these cylinders through a hole and fasten with a nut on the other side for a rigid mount.

Double Acting Actuation

No Cushion with Stainless Steel Body

516 in Bore Dia

716 in Bore Dia

916 in Bore Dia

34 in Bore Dia

78 in Bore Dia

1 116 in Bore Dia

1 14 in Bore Dia

1 12 in Bore Dia

1 34 in Bore Dia

2 in Bore Dia

2 12 in Bore Dia

3 in Bore Dia

Pivot Mount

The pivoting end on these cylinders helps maintain alignment and allow loads to travel through an arc. They minimize side loading by absorbing force on the cylinder centerline.

Double Acting Actuation

No Cushion with Stainless Steel Body

716 in Bore Dia

916 in Bore Dia

34 in Bore Dia

78 in Bore Dia

1 116 in Bore Dia

1 14 in Bore Dia

1 12 in Bore Dia

Air Cushion with Stainless Steel Body

25 mm Bore Dia

Pivot & Nose Mount

With a fixed, threaded nose on one end and a pivot on the other, these cylinders combine stability and the ability to compensate for misalignment. The threaded nose mounts through a hole and fastens with a nut while the rear pivot can be attached to a swivel bracket.

Double Acting Actuation

No Cushion with Stainless Steel Body

516 in Bore Dia

716 in Bore Dia

916 in Bore Dia

34 in Bore Dia

78 in Bore Dia

1 116 in Bore Dia

1 14 in Bore Dia

1 12 in Bore Dia

1 34 in Bore Dia

2 in Bore Dia

2 12 in Bore Dia

3 in Bore Dia

Double End Mount

Threaded bosses create more rigidity and flexibility in these cylinders, allowing them to be fastened into place using a nut at each end.

Double Acting Actuation

No Cushion with Stainless Steel Body

916 in Bore Dia

34 in Bore Dia

78 in Bore Dia

1 116 in Bore Dia

1 14 in Bore Dia

1 12 in Bore Dia

2 in Bore Dia

Front Block Mount

Rigid mounting at the front end of the cylinder allows the back to hang freely, which is useful in limited spaces.

Double Acting Actuation

No Cushion Cushion with Stainless Steel Body

516 in Bore Dia

716 in Bore Dia

34 in Bore Dia

1 116 in Bore Dia

1 12 in Bore Dia

Rear Block Mount

For a stable, rigid mount at the rear of the cylinder, opposite the nose, choose these rear block cylinders. They allow the front of the cylinder to hang in limited spaces.

Double Acting Actuation

No Cushion with Stainless Steel Body

716 in Bore Dia

34 in Bore Dia

1 116 in Bore Dia

1 12 in Bore Dia

Basic Mount (MX0)

Create and customize your own mounting for these cylinders based on your requirements.

Double Acting Actuation

No Cushion with Stainless Steel Body

34 in Bore Dia

1 116 in Bore Dia

Air Cushion with Aluminum Body

25 mm Bore Dia