Filter Results
Measurement System
Shaft Diameter
Overall Length
Material
Fully Keyed Rotary Shafts

Fully Keyed Rotary Shafts

Connect keyed components such as bearings or shaft couplings to these keyed rotary drive shafts to transmit power and rotation between parts in a drive system. In general, keyed shafts and components are recommended over plain rotary shafts and non-keyed components for applications with higher loads. Keyed rotary shafts can be machined for secondary operations.

General Purpose Steel

Steel shafts provide good strength and hardness and are the most common choice for a wide range of applications where corrosion is not a concern.

Inch

Polished — 1045 Steel

516 in Shaft Dia. — (Keyway 332 in Wd. x 364 in Ht.)

38 in Shaft Dia. — (Keyway 332 in Wd. x 364 in Ht.)

12 in Shaft Dia. — (Keyway 18 in Wd. x 116 in Ht.)

58 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

1116 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

34 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

1316 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

78 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

1516 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 18 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 316 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 14 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 516 in Shaft Dia. — (Keyway 516 in Wd. x 532 in Ht.)

1 38 in Shaft Dia. — (Keyway 516 in Wd. x 532 in Ht.)

1 716 in Shaft Dia. — (Keyway 38 in Wd. x 316 in Ht.)

1 12 in Shaft Dia. — (Keyway 38 in Wd. x 316 in Ht.)

1 58 in Shaft Dia. — (Keyway 38 in Wd. x 316 in Ht.)

1 34 in Shaft Dia. — (Keyway 38 in Wd. x 316 in Ht.)

1 1516 in Shaft Dia. — (Keyway 12 in Wd. x 14 in Ht.)

2 in Shaft Dia. — (Keyway 12 in Wd. x 14 in Ht.)

2 316 in Shaft Dia. — (Keyway 12 in Wd. x 14 in Ht.)

2 716 in Shaft Dia. — (Keyway 58 in Wd. x 516 in Ht.)

2 12 in Shaft Dia. — (Keyway 58 in Wd. x 516 in Ht.)

Metric

Polished — 1045 Steel

12 mm Shaft Dia. — (Keyway 4 mm Wd. x 2 12 mm Ht.)

15 mm Shaft Dia. — (Keyway 5 mm Wd. x 3 mm Ht.)

20 mm Shaft Dia. — (Keyway 6 mm Wd. x 3 12 mm Ht.)

24 mm Shaft Dia. — (Keyway 8 mm Wd. x 4 mm Ht.)

25 mm Shaft Dia. — (Keyway 8 mm Wd. x 4 mm Ht.)

50 mm Shaft Dia. — (Keyway 14 mm Wd. x 5 12 mm Ht.)

8 mm Shaft Dia. — (Keyway 2 mm Wd. x 1 15 mm Ht.)

Corrosion-Resistant Stainless Steel

Made from corrosion-resistant stainless steel, these shafts are suitable for use in applications where corrosive elements may be present, such as food processing, pharmaceutical, and marine facilities.

Inch

Polished — 304 Stainless Steel

38 in Shaft Dia. — (Keyway 332 in Wd. x 364 in Ht.)

12 in Shaft Dia. — (Keyway 18 in Wd. x 116 in Ht.)

58 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

34 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

1 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 316 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 14 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 716 in Shaft Dia. — (Keyway 38 in Wd. x 316 in Ht.)

1 12 in Shaft Dia. — (Keyway 38 in Wd. x 316 in Ht.)

2 in Shaft Dia. — (Keyway 12 in Wd. x 14 in Ht.)

Polished — 316 Stainless Steel

12 in Shaft Dia. — (Keyway 18 in Wd. x 116 in Ht.)

58 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

34 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

1 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 14 in Shaft Dia. — (Keyway 14 in Wd. x 18 in Ht.)

1 716 in Shaft Dia. — (Keyway 38 in Wd. x 316 in Ht.)

1 12 in Shaft Dia. — (Keyway 38 in Wd. x 316 in Ht.)

2 316 in Shaft Dia. — (Keyway 12 in Wd. x 14 in Ht.)

Lightweight Aluminum

Nonmagnetic, lightweight aluminum shafts provide good corrosion resistance and help keep inertia low in applications where the rotational speed of the drive system will vary, such as in automobiles.

Inch

Polished — 2024 Aluminum

38 in Shaft Dia. — (Keyway 332 in Wd. x 364 in Ht.)

12 in Shaft Dia. — (Keyway 18 in Wd. x 116 in Ht.)

58 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)

34 in Shaft Dia. — (Keyway 316 in Wd. x 332 in Ht.)