Filter Results
Flow Direction
Center Position
Configuration
# of Positions
Return Type
Max Air Flow
Coefficient of Volume
Max Op Pressure
Max Op Temp
Pipe Size
Connection Type
Body Material
Hand-Actuated Manual Directional Control Valves

Hand-Actuated Manual Directional Control Valves

Adjust airflow manually with these valves. By pushing or turning a toggle, knob, button, or lever, you can control or restrict airflow to operate your device or shut it down for maintenance. These valves can also be used in remote areas where power is not available.

Rotary Lever

Recommended for stationary air cylinders, these valves have a rotary lever that can be turned between multiple positions to redirect flow and perform different functions in your pneumatic system.

4-Way Flow Direction — 2 Positions

Manual Return

4-Way Flow Direction — 3 Positions

Manual Return

Normally Closed Configuration

Lever

Pull the lever to switch between two or three different valve positions. The base on these valves can be easily mounted to machines or benches.

3-Way Flow Direction — 2 Positions

Manual Return

Normally Closed Configuration

Spring Return

Normally Closed Configuration

4-Way Flow Direction — 2 Positions

Manual Return

Spring Return

Detented Return

4-Way Flow Direction — 3 Positions

Spring Return

Normally Closed Configuration

Normally Open Configuration

Detented Return

Normally Closed Configuration

Normally Open Configuration

Button

Redirect or shut off flow with the push of a button. These valves are small and designed for single finger use.

3-Way Flow Direction — 2 Positions

Spring Return

Normally Closed Configuration

4-Way Flow Direction — 2 Positions

Spring Return

Normally Closed / Normally Open Configuration

Normally Closed Configuration

Palm Button

Larger than a standard button, the palm button on these valves is easy to press for controlling airflow in your pneumatic system.

3-Way Flow Direction — 2 Positions

Manual Return

Normally Closed Configuration

Spring Return

Normally Closed Configuration

4-Way Flow Direction — 2 Positions

Manual Return

Spring Return

Normally Closed Configuration

Toggle

Simple back-and-forth design toggles between positions. These valves are ideal for controlling cylinders, gates, slides, and other components that perform either an on/off or open/close function.

3-Way Flow Direction — 2 Positions

Maintained Return

Normally Closed Configuration

Manual Return

Normally Closed Configuration

4-Way Flow Direction — 2 Positions

Maintained Return

Normally Closed Configuration

Knob

Turn the knob to control the amount of air flowing through your system by using these valves.

3-Way Flow Direction — 2 Positions

Detented Return

Normally Closed / Normally Open Configuration

4-Way Flow Direction — 3 Positions

Detented Return

Normally Closed / Normally Open Configuration

Fingertip Lever

Press lightly on the tip level to actuate these valves. A spring returns them to their normal position when you let go. These valves are ideal for powering small- or medium-sized cylinders, piloting larger valves, and controlling gates, slides, and other components that perform either an on/off or open/close function.

3-Way Flow Direction — 2 Positions

Spring Return

Normally Closed Configuration

Turn Selector

Ideal for sensing the position of and controlling moving devices such as cylinders, gates, and slides, these valves can be turned between two positions.

3-Way Flow Direction — 2 Positions

Manual Return

Normally Closed Configuration

4-Way Flow Direction — 2 Positions

Manual Return

Normally Closed Configuration

Tailgate Control Rotary Handle

Control the opening and closing of the valves by moving this lever to the correction position.

4-Way — 3 Positions

Two-Hand Safety Control

Two hands are required to move these valves, which reinforces safety and helps prevent accidental activation. They are suited for machines where an operator's hands must be monitored.