Filter Results
Load Direction
Measurement System
Bore Dia
OD
Overall Length
Lubrication
Material Grade
Material
Max Op Temp
Min Op Temp
Specs Met
Metal Flanged Sleeve Bearings

Metal Flanged Sleeve Bearings

Flanges on the ends of these metal sleeve bearings allow the bearing to support axial, or thrust, loads (where the load is parallel to the shaft) and radial loads (where the load is perpendicular to the shaft).

Sleeve bearings reduce friction among moving parts as they slide against each other. In general, they are more compact and can handle higher loads than rolling element bearings.

General Purpose Oil Impregnated

The choice for most common applications, these bearings are made of porous bronze that is impregnated with oil, which releases over time for continuous lubrication.

Inch — SAE 841 Bronze

For 316 in Shaft Dia.

For 14 in Shaft Dia.

For 516 in Shaft Dia.

For 38 in Shaft Dia.

For 12 in Shaft Dia.

For 58 in Shaft Dia.

For 34 in Shaft Dia.

For 78 in Shaft Dia.

For 1 in Shaft Dia.

For 1 14 in Shaft Dia.

For 1 12 in Shaft Dia.

Metric — SAE 841 Bronze

For 12 mm Shaft Dia.

For 14 mm Shaft Dia.

For 16 mm Shaft Dia.

For 6 mm Shaft Dia.

For 8 mm Shaft Dia.

For High Temperatures

These bearings are made of cast bronze for strength and resistance to high temperatures and wear.

Metric — SAE 660/C93200 Cast Bronze

For 10 mm Shaft Dia.

For 12 mm Shaft Dia.

For 16 mm Shaft Dia.

For 20 mm Shaft Dia.

For 8 mm Shaft Dia.

For 9 mm Shaft Dia.

For Ultra-High Temperatures

Suitable for applications such as glass manufacturing, furnaces, and medical processing, these self-lubricating bearings are made of bronze impregnated with graphite for resistance to extreme high temperatures.

Inch — SAE 841 Bronze

For 14 in Shaft Dia.

For 516 in Shaft Dia.

For 38 in Shaft Dia.

For 716 in Shaft Dia.

For 12 in Shaft Dia.

For 58 in Shaft Dia.

For 34 in Shaft Dia.

For 1 in Shaft Dia.

For 1 14 in Shaft Dia.

Low-Friction Oil Impregnated with PTFE Particles

Offering lower friction and quieter operation than other oil-impregnated metal bearings, these oil-impregnated, PTFE-filled bearings are recommended for low-speed applications with frequent starting and stopping.

Inch — SAE 841 Bronze

For 316 in Shaft Dia.

For 14 in Shaft Dia.

For 516 in Shaft Dia.

For 38 in Shaft Dia.

For 12 in Shaft Dia.

For 58 in Shaft Dia.

For 34 in Shaft Dia.

For 1 in Shaft Dia.

For 1 14 in Shaft Dia.

Food-Grade Oil Impregnated

The integrated lubrication in these bearings meets USDA requirements for use in some food and pharmaceutical industries.

Inch — SAE 841 Bronze

For 34 in Shaft Dia.

For 1 14 in Shaft Dia.