Filter Results
ID (Fits Shaft Diameter)
OD (Fits Housing Bore)
Overall Width
# of Lips
Max Pressure
Specs Met
Rotary Shaft Seals

Rotary Shaft Seals

Also called radial shaft seals, rotary shaft seals help retain lubricants between rotating shafts and components that are mounted to the shaft. Properly fitted shaft seals also help prevent dirt, moisture, and other contaminants from entering lubricated parts.

Rotary shaft seals consist of a rigid housing and one or more flexible lips made from elastomeric materials. The housing sits flush against the shaft-mounted component, and the lip flexes to form a seal between the component and the shaft. For best results, shaft seals should be used on smooth, undamaged shaft surfaces or worn shaft surfaces that have been repaired with a shaft wear sleeve.

Oil-Resistant Seals with Reinforced Lip

Suitable for a range of applications, these oil-resistant seals have a reinforced lip.

Steel Case — Nitrile Rubber Lip Material

For 1316 in Shaft Dia.

For 34 in Shaft Dia.

For 1 in Shaft Dia.

For 1 18 in Shaft Dia.

For 1 14 in Shaft Dia.

For 1 38 in Shaft Dia.

For 1 12 in Shaft Dia.

For 1 34 in Shaft Dia.

For 1 78 in Shaft Dia.

Heavy Duty Oil-Resistant Seals with Reinforced Lip

Featuring an extra sealing lip, these heavy duty oil-resistant seals provide greater contaminant exclusion than standard oil-resistant seals.

Steel Case — Nitrile Rubber Lip Material

For 12 in Shaft Dia.

For 58 in Shaft Dia.

For 34 in Shaft Dia.

For 1 in Shaft Dia.

For 1 18 in Shaft Dia.

For 1 14 in Shaft Dia.

For 1 38 in Shaft Dia.

For 1 12 in Shaft Dia.

For 1 34 in Shaft Dia.

For 1 78 in Shaft Dia.

For 2 12 in Shaft Dia.

For 2 in Shaft Dia.

Oil-Resistant Seals with Reinforced Lip & Adaptable Case

The rubber case on these oil-resistant seals provides excellent sealing even in rough or split housings. These seals also have a spring-loaded lip and a beaded outside diameter for improved sealing ability and better oil retention.

Steel Case — Nitrile Rubber Lip Material

For 1316 in Shaft Dia.

For 1 316 in Shaft Dia.

For 1 916 in Shaft Dia.

For 58 in Shaft Dia.

For 1 in Shaft Dia.

For 1 38 in Shaft Dia.

Grease-Resistant Seals

Suitable for grease-lubricated, moderate-speed applications, such as on agricultural machinery, these seals have a metal case and are installed with the sealing lip facing outward for maximum exclusion of contaminants.

Steel Case — Nitrile Rubber Lip Material

For 34 in Shaft Dia.