Filter Results
Chain #
Pitch
# of Teeth
Bore
Bore Dia
Bushing
For Bushing Type
Material
Single-Strand Sprockets

Single-Strand Sprockets

Connect two of these sprockets with a compatible single-strand roller chain to create a chain drive system. Unlike belt drive systems, chain drives will not slip or creep, and they can operate in wet, dirty, or corrosive environments. For use with roller chains that have the same ANSI number.

Plain Bore for ANSI Roller Chains

Machine the plain bore of these sprockets to the precise dimensions for your application and add keyways and other features, if desired.

Steel

For No. 25 Roller Chain (14 in Pitch)

For No. 35 Roller Chain (38 in Pitch)

For No. 40 Roller Chain (12 in Pitch)

For No. 41 Roller Chain (12 in Pitch)

For No. 50 Roller Chain (58 in Pitch)

For No. 60 Roller Chain (34 in Pitch)

For No. 80 Roller Chain (1 in Pitch)

For No. 160 Roller Chain (2 in Pitch)

Stainless Steel

For No. 25 Roller Chain (14 in Pitch)

For No. 35 Roller Chain (38 in Pitch)

For No. 40 Roller Chain (12 in Pitch)

For No. 50 Roller Chain (58 in Pitch)

For No. 60 Roller Chain (34 in Pitch)

Finished Bore for ANSI Roller Chains

These ready-to-use sprockets are machined to fit a specific shaft diameter and include a standard keyway and set screws for attaching the sprockets to a shaft.

Hardened Steel

For No. 35 Roller Chain (38 in Pitch)

Finished with No Keyway

Finished with Keyway

For No. 40 Roller Chain (12 in Pitch)

Finished with No Keyway

Finished with Keyway

For No. 41 Roller Chain (12 in Pitch)

Finished with Keyway

For No. 50 Roller Chain (58 in Pitch)

Finished with Keyway

For No. 60 Roller Chain (34 in Pitch)

Finished with Keyway

Quick-Disconnect Bushing Bore for ANSI Roller Chains

Install quick-disconnect (QD) bushings in the bores of these sprockets.

Hardened Steel

For No. 40 Roller Chain (12 in Pitch)

For No. 50 Roller Chain (58 in Pitch)

For No. 60 Roller Chain (34 in Pitch)

Split-Taper Bushing Bore for ANSI Roller Chains

The bores on these sprockets can accommodate split-taper bushings.

Hardened Steel

For No. 40 Roller Chain (12 in Pitch)

For No. 50 Roller Chain (58 in Pitch)

For No. 60 Roller Chain (34 in Pitch)

Taper-Lock Bushing Bore for ANSI Roller Chains

These sprockets have bores that accept taper-lock bushings.

Steel

For No. 40 Roller Chain (12 in Pitch)

For No. 50 Roller Chain (58 in Pitch)

For No. 60 Roller Chain (34 in Pitch)

Hardened Steel

For No. 40 Roller Chain (12 in Pitch)

For No. 50 Roller Chain (58 in Pitch)

For No. 60 Roller Chain (34 in Pitch)