Filter Results
Measurement System
Diameter
Overall Length
Material
Material Grade
Material Treatment
Surface Finish
Min Hardness
Straight Linear Shafts

Straight Linear Shafts

Cut these straight linear shafts to the length you need for your application and mount them with clamp-type shaft supports. Use linear shafts to support parts that move in a straight line, such as linear ball bearings or sleeve bearings.

General Purpose Steel

These steel shafts provide good strength and hardness in a wide range of applications where corrosion is not a concern.

Inch — Steel 1566

Case Hardened — Plain Surface Finish

14 in Shaft Dia.

38 in Shaft Dia.

12 in Shaft Dia.

58 in Shaft Dia.

34 in Shaft Dia.

1 in Shaft Dia.

1 14 in Shaft Dia.

1 12 in Shaft Dia.

Case Hardened — Chrome Surface Finish

12 in Shaft Dia.

58 in Shaft Dia.

34 in Shaft Dia.

1 in Shaft Dia.

1 12 in Shaft Dia.

Annealed Ends — Plain Surface Finish

38 in Shaft Dia.

12 in Shaft Dia.

34 in Shaft Dia.

1 in Shaft Dia.

1 12 in Shaft Dia.

Unhardened — Plain Surface Finish

38 in Shaft Dia.

12 in Shaft Dia.

58 in Shaft Dia.

34 in Shaft Dia.

1 in Shaft Dia.

1 14 in Shaft Dia.

Metric — Steel 1566

Case Hardened — Plain Surface Finish

12 mm Shaft Dia.

16 mm Shaft Dia.

20 mm Shaft Dia.

25 mm Shaft Dia.

Unhardened — Plain Surface Finish

10 mm Shaft Dia.

12 mm Shaft Dia.

20 mm Shaft Dia.

25 mm Shaft Dia.

30 mm Shaft Dia.

Corrosion-Resistant Stainless Steel

Made from corrosion-resistant stainless steel, these shafts are suitable for applications where corrosive elements may be present.

Inch — Stainless Steel 440C

Case Hardened — Plain Surface Finish

14 in Shaft Dia.

38 in Shaft Dia.

12 in Shaft Dia.

58 in Shaft Dia.

34 in Shaft Dia.

1 in Shaft Dia.

Annealed Ends — Plain Surface Finish

38 in Shaft Dia.

34 in Shaft Dia.

1 in Shaft Dia.

Lightweight Aluminum

Nonmagnetic, lightweight aluminum shafts provide good corrosion resistance and help keep inertia low in applications where the speed of the drive system will vary.

Inch — 6061-T6 Aluminum

Case Hardened — Ceramic Surface Finish

12 in Shaft Dia.

34 in Shaft Dia.

1 in Shaft Dia.

1 14 in Shaft Dia.