Filter Results
For Belt Type
Belt Width
# of Teeth
Bore
For Bushing Type
OD
Material
Trapezoidal-Tooth Timing Belt Pulleys

Trapezoidal-Tooth Timing Belt Pulleys

Install these pulleys in drive systems that use trapezoidal-tooth timing belts. They have trapezoidal grooves that provide maximum surface contact with the belt teeth for good power transmission and minimal slipping. When matching a belt to a pulley, make sure the style (or series), pitch, and width of the belt are compatible with the pulley.

XL Series (0.200" Pitch) with Plain Bore

Compatible with XL series trapezoidal-tooth timing belts, these XL series pulleys have a plain bore and mount directly to the drive shaft using the included set screws. They have a starter hole that can be enlarged up to the maximum bore diameter to create a bore hole with the proper size for your application.

Anodized Aluminum

For 38 in Belt Wd

With 2 Flanges

Without Flanges

L Series (0.375" Pitch) with Bushed Bore

Use these L series pulleys with corresponding L series trapezoidal-tooth timing belts. They have a bushed bore and must be connected to a drive shaft with a bushing.

Powder-Coated Steel

For 1 in Belt Wd

With 2 Flanges

Without Flanges

For 12 in Belt Wd

With 2 Flanges

Without Flanges

H Series (0.500" Pitch) with Bushed Bore

Connect corresponding H series trapezoidal-tooth timing belts to these H series pulleys. They have a bushed bore and must be connected to a drive shaft with a bushing.

Powder-Coated Steel

For 1 in Belt Wd

With 2 Flanges

Without Flanges