View Similar Products

Bearing Heater: 480V AC, 20 A Current, 22 in Max Bearing OD, 9 in Max Bearing Bore Dia, 11.5 in Max Bearing Wd, 16 in Ht

Item # 365U811

$4,956.36 Each

Product Specs

Voltage: 480V AC
Current: 20 A
Maximum Bearing OD: 22 in
Maximum Bearing Bore Diameter: 9 in
Maximum Bearing Width: 11.5 in
Overall Length: 22 in
Height: 16 in
Crossbar Length: 18 3⁄4 in
Maximum Operating Temperature: 250 ° F
Automatic Temperature Regulation: No
Crossbar Square Size: 3 in; 1.25 in
Frequency: 60 Hz
Heater Type: Crossbar
Heating Method: Magnetic Induction
Heats Pre-Greased Bearings: Yes
Heats Sealed Bearings: Yes
Includes: (1) 1 1/4 in Crossbar; (1) 3 in Crossbar
Maximum Bearing Weight: 300 lb
Minimum Bearing Bore Diameter: 1 3⁄8 in
Overall Width: 10 in
Pack Qty: 1
Pack Unit: EA
Portable: No
Power Source: Power Cord
Wattage: 8,800 W

Compliance and Restrictions

Country Of Origin

  • USA

About Bearing Heaters

Heat bearings to temporarily expand their inner race so they can be installed on a shaft without forcing or hammering them, which may damage the shaft or cause the bearing to be misaligned. The bearing contracts as it cools for a snug fit. Bearing heaters can also be used to warm bearings inside shaft-mounted components like pulleys, sprockets, bushings, couplings, sleeves, or gears.

These crossbar heaters can accommodate bearings with a variety of outside diameters and widths, but the inside diameter of the bearings must closely match the diameter of the crossbar.