View Similar Products

Carbide Tipped Drill Bit: Individual, Regular Spiral, 1/2 in Drill Dia, 0.5000 in Decimal Equivalent, 4 in Overall Lg

Item # 315X726

$2.78 Each

Product Specs

Flute Type: Spiral
Cutting Head Type: 2-Cutter
Shank Type: Round
Drill Diameter: 1/2 in
Decimal Equivalent: 0.5 in
Maximum Drilling Depth: 2 3⁄4 in
Overall Length: 4 in
Shank Diameter: 1⁄4 in
Pack Qty: 1
Quantity: Individual
Bit Material: Carbide Tipped
Cutting Direction: Right Hand
Display Sell UOM: EA
Drill Bit Style: Spiral
Drill Diameter Measurement System: Inch
Drilling Application: Conventional Drilling
Flute Length: 2 5⁄10 in
For Material Thickness: 1/2 in - 2-3/4 in
For Screw Anchor Tools: Condrive 1000 Installation Tool
For Screw Anchoring: No
For Tool Type: Rotary Hammer Drill
For Use On (Best): Masonry; Glass, Tile & Porcelain
For Use On (Good): Light Masonry Materials
Material Grade: YG8
Number of Flutes: 2
Point Angle: 118 °
Rebar Cutter: No
Removable Shank: No
Shank Included: Yes
Surface Finish: Bright (Uncoated)

Compliance and Restrictions

Country Of Origin

  • China

About Carbide Tipped Drill Bits

Drill through tough materials such as concrete and brick with one of these carbide tipped drill bits. Carbide tipped tools offer the strength and wear resistance of carbide steel on just the cutting edge. Choose between fast spiral bits for drilling into softer or more brittle materials such as block and brick, slow spiral bits for drilling into harder surfaces such as concrete, or regular spiral bits for drilling into a wide range of materials. The bits may have 2, 3, or 4 cutting edges at the tip. Drills with more cutting edges produce less vibration than drills with fewer cutting edges and offer better drilling performance and hole quality in harder materials.

Insert these bits into the 3-jaw chuck of a regular handheld drill. The most common shank style, round shank drill bits provide more accurate centering than hex shank or 3-flat shank bits, but must be tightened in the chuck to keep from slipping. These drill bits should not be used with hammer-action drills.

Associated Products (2)