View Similar Products

Centrifugal Pool Pump: 1 1/2 hp Input Horsepower, Continuous Motor Duty Class, Thermoplastic, 1 Phase, 115V /230V AC, Closed

Item # 107A904

$770.40 Each

Product Specs

Motor Duty Class: Continuous
Housing Material: Thermoplastic
Phase: 1
Voltage: 115V /230V AC
Impeller Design: Closed
Input Horsepower: 1 1⁄2 hp
Maximum Flow Rate: 99 gpm
Maximum Head: 72 ft
Service Factor: 1.2
Inlet Pipe Size: 1 1⁄2 in
Outlet Pipe Size: 1 1⁄2 in
Includes: (1) 6 in Integral Hair; (1) Lint Strainer
Application: Swimming Pools and Spas
Bearing: Ball
Best Efficiency Flow @ Head: 90.9 gpm at 20 ft of Head; 82.2 gpm at 30 ft of Head; 72.6 gpm at 40 ft of Head; 61.2 gpm at 50 ft of Head
Best Efficiency Flow Range @ Head: 61 to 90 gpm at 50 to 20 ft of Head
Centrifugal Pump Flow Type: Straight
Close Coupled: No
Control Box Included: No
Current: 19.4 A/9.7 A
Diffuser Material: PP+20%GF
Display Sell UOM: EA
Environment: Sanitary Locations
Fasteners Included: No
Features: Extra Large Integral Trap; Easy Service of the Trap; Long Life; Floating Wear Ring; Allows Small Impurities to Pass Through
Flange Bolt Circle Diameter: 8.86 in
Flange Bolt Hole Diameter: 0.36 in
Flange OD: 9.84 in
For Fluid Type: Water
For Use With: Nonflammable Liquids Compatible With Pump Component Materials
Handle: No
Hertz: 60 Hz
Housing Finish/Coating: Uncoated
Impeller Material: Polypropylene/Glass Filled
Impeller OD: 4.53 in
Inlet Center Height: 9.8 in
Inlet Center-to-Outlet End Height: 2.3 in
Inlet Gender: Female
Inlet Thread Pitch: 2.209 mm
Inlet Thread Size: 1 1/2 in
Inlet Type: NPT
Lead-Free: No
Magnetic Drive: No
Manufacturer Warranty Length: 1 yr
Maximum Ambient Temperature: 40 ° F
Maximum Case Pressure: 65 psi
Maximum Flow Rate @ Various Head: 99.4 gpm at 10 ft of Head; 90.9 gpm at 20 ft of Head; 82.2 gpm at 30 ft of Head; 72.6 gpm at 40 ft of Head; 61.2 gpm at 50 ft of Head; 47.0 gpm at 60 ft of Head; 32.0 gpm at 70 ft of Head
Maximum Flow Rate @ Various Pressure: Not Avaialble
Maximum Fluid Temperature: 102 ° F
Maximum Head Pressure: 32 psi
Maximum Motor Speed: 3,450 RPM
Maximum Operating Temperature: 105 ° F
Maximum Self-Priming Distance: 10 ft
Maximum Solid Diameter: 2 mm
Minimum Operating Temperature: 40 ° F
Motor Electrical Connection: Bare Lead
Motor Enclosure: (ODP) Open Drip Proof
Motor Frame Designation: 56Y
Motor Insulation Class: B
Motor Type: Capacitor Start
Mounting Hardware Included: No
Number of Flange Bolt Holes: 8
Number of Inlets: 1
Number of Outlet Positions: 1
Number of Outlets: 1
Number of Vanes: 5
O-Ring Material: NBR
Outlet Gender: Female
Outlet Thread Pitch: 2.209 mm
Outlet Type: NPT
Overall Depth: 25 21⁄32 in
Overall Height: 14 13⁄16 in
Overall Width: 10 in
Port Rotation: 4
Portable: Yes
Power Source: Electric-Powered
Protection Features: Thermal Overload Protection
Resistance Properties: Corrosion Resistant
Runs Dry: No
Seal Material: Carbon; Ceramic
Seal Type: Mechanical
Self-Priming: Yes
Shaft Material: Stainless Steel
Shaft OD: 0.625 in
Specifications Met: NSF Certified; CSA Certified
Submersible: No
Volute Material: Glass Reinforced
Wetted Material: Carbon; Ceramic; Thermoplastic; Stainless Steel; Brass; Buna

Compliance and Restrictions

Country Of Origin

  • China

About Swimming Pool Pumps

Circulate the water in your swimming pool to facilitate filtering, ensure that the chemicals stay properly mixed, and avoid higher pool maintenance costs with these pumps. Find the right size pump for your pool to adequately circulate the water.

These pumps are installed above the water line in swimming pools and spas and are designed to self-prime by pulling water into the pump. They can typically handle greater volumes of water and higher flow rates than above-ground pool pumps.