View Similar Products

Centrifugal Pump: 1 1/2 hp Input Horsepower, Continuous Motor Duty Class, (ODP) Open Drip Proof, NPT, Semi-Open, 1 Phase, Cast Iron

Item # 291Z945

$549.10 Each

Product Specs

Motor Duty Class: Continuous
Motor Enclosure: (ODP) Open Drip Proof
Inlet Type: NPT
Impeller Design: Semi-Open
Phase: 1
Voltage: 115V / 208-230V AC
Input Horsepower: 1 1⁄2 hp
Maximum Flow Rate: 115 gpm
Maximum Head: 67 ft
Impeller Material: Cast Iron
Maximum Fluid Temperature: 200 ° F
Maximum Solid Diameter: 1⁄2 in
Inlet Pipe Size: 1 1⁄2 in
Outlet Pipe Size: 1 1⁄4 in
Outlet Type: NPT
Application: Irrigation; Water Circulation; Boosters; Fountains; Marine Applications; Condensate Return; Cooling Towers; Filtration; General Transfer; Boiler Feed; Utility; Transfer of Nonflammable Liquids; Spraying Systems; Jockey Pump Service; Chemical Processing; Aggressive Liquid Applications; Other General Purpose
Bearing: Ball
Best Efficiency Flow Range @ Head: 55-99 gpm at 55-25 ft of Head
Close Coupled: Yes
Current: 17.0 A/9.0 A/8.5 A
Display Sell UOM: EA
Features: Produce High Flow Rates Under Moderate Head Conditions; Continuous Low-Pressure Circulation
For Fluid Type: Nonflammable Fluids; Water
Hertz: 60 Hz
Housing Finish/Coating: Zinc Plated
Housing Material: Cast Iron
Includes: (1) Manual
Inlet Center Height: 3 1⁄2 in
Inlet Center-to-Outlet End Height: 2 1⁄2 in
Inlet Gender: Female
Inlet Pressure: 200 psi
Inlet Thread Size: 1 1/2 in
Manufacturer Warranty Length: 1 yr
Maximum Case Pressure: 200 psi
Maximum Flow Rate @ Various Head: 40 gpm @ 60 ft of Head; 64 gpm @ 50 ft of Head; 81 gpm @ 40 ft of Head; 94 gpm @ 30 ft of Head; 104 gpm @ 20 ft of Head; 109 gpm @ 15 ft of Head; 115 gpm @ 10 ft of Head
Maximum Head Pressure: 29 psi
Maximum Motor Speed: 3,450 RPM
Maximum Operating Temperature: 200 ° F
Maximum Specific Gravity: 1
Maximum Viscosity: 100 SUS
Minimum Operating Temperature: 40 ° F
Motor Frame Designation: 56J
Motor Type: Capacitor Start
Mount Hole Bolt Diameter: 17⁄50 in
Mount Hole Center-to-Center Length: 3 in
Mount Hole Center-to-Center Width: 4 7⁄8 in
Mounting Hardware Included: No
Not for Fluid Type: Caustic; Flammable
Number of Inlets: 1
Number of Mount Holes: 4
Number of Outlets: 1
Outlet Gender: Female
Outlet Thread Size: 1 1/4 in
Overall Depth: 14 2⁄5 in
Overall Height: 6 in
Overall Width: 7 1⁄8 in
Port Rotation: 4 Increments
Power Source: Electric-Powered
Protection Features: Overload Protection in Motor
Runs Dry: No
Seal Material: Stainless Steel; Ceramic; Carbon; Buna-N
Seal Type: Mechanical
Self-Priming: No
Shaft Material: 304 Stainless Steel
Specifications Met: cULus Listed
Submersible: No
Wetted Material: Cast Iron; Buna-N; Carbon; Ceramic; 316 Stainless Steel

Compliance and Restrictions

Country Of Origin

  • India

About Straight Center Centrifugal Discharge Pumps

Commonly used in industrial applications like water circulation, process applications, and irrigation, these straight center discharge pumps provide a consistent flow without requiring elevated pressure during fluid transfer. They discharge water on a straight line for streamlined flow, as opposed to pumps with a side discharge. Pumps also feature continuous-duty motors, are equipped with centerline NPT connections and drain plugs, and require a pump control box for use. Centrifugal pumps use impellers to draw in fluid, creating high velocity movement which results in a high flow rate.

Use these pumps to push high volumes of water through the system, and provide a continuous high flow rate for use in pressure boosting, spray systems, filtration, and chillers.