View Similar Products

Centrifugal Pump: 3 hp Input Horsepower, Continuous Motor Duty Class, (TEFC) Totally Enclosed Fan Cooled, Flange, Closed

Item # 888X293

Sorry, this product is currently unavailable.

Product Specs

Motor Duty Class: Continuous
Motor Enclosure: (TEFC) Totally Enclosed Fan Cooled
Inlet Type: Flanged
Impeller Design: Closed
Phase: 3
Voltage: 208-230V / 460V AC
Input Horsepower: 3 hp
Maximum Flow Rate: 197 gpm
Maximum Head: 84 ft
Impeller Material: Stainless Steel
Maximum Fluid Temperature: 200 ° F
Maximum Solid Diameter: 15⁄32 in
Inlet Pipe Size: 2 in
Outlet Type: Flange
Application: Industrial, Commercial and Process Applications; Liquid Transfer; Chemical Transfer; Dewatering; Irrigation
Bearing: Double Sealed Ball
Best Efficiency Flow Range @ Head: 62-72 gpm at 131-97 ft of Head
Centrifugal Pump Flow Type: Straight
Close Coupled: Yes
Control Box Required: Yes
Current: 8.2 A/7.4 A/3.7 A
Display Sell UOM: EA
Features: Provide High Volume Service
For Fluid Type: Water; Nonflammable Fluids
Hertz: 60 Hz
Housing Material: Stainless Steel
Includes: (1) Manual
Inlet Center Height: 4 1⁄2 in
Inlet Center-to-Outlet End Height: 6 in
Inlet Gender: Female
Inlet Pressure: 100 psi
Magnetic Drive: Yes
Manufacturer Warranty Length: 1 yr
Maximum Case Pressure: 200 psi
Maximum Flow Rate @ Various Head: 179 gpm @ 40 ft of Head; 159 gpm @ 50 ft of Head; 137 gpm @ 60 ft of Head; 109 gpm @ 70 ft of Head; 197 gpm @ 30 ft of Head
Maximum Head Pressure: 36 psi
Maximum Motor Speed: 3,500 RPM
Maximum Operating Temperature: 200 ° F
Maximum Specific Gravity: 1
Minimum Operating Temperature: 40 ° F
Motor Frame Designation: 182JM
Motor Type: Magnetic Starter
Mount Hole Bolt Diameter: 41⁄100 in
Mount Hole Center-to-Center Length: 4 1⁄2 in
Mount Hole Center-to-Center Width: 7 1⁄2 in
Mounting Hardware Included: No
Mounting Hardware Required: Yes
Not for Fluid Type: Caustic; Flammable
Number of Flange Bolt Holes: 4
Number of Inlets: 1
Number of Mount Holes: 4
Number of Outlets: 1
O-Ring Material: Viton
Outlet Gender: Female
Overall Depth: 21 1⁄10 in
Overall Height: 10 1⁄2 in
Overall Width: 11 1⁄4 in
Port Rotation: 4 Increments
Power Source: Electric-Powered
Protection Features: Full 3-Leg Protection
Runs Dry: No
Seal Material: Carbon; Ceramic; Viton
Seal Type: Mechanical
Shaft Material: Steel
Specifications Met: UL Listed
Submersible: No
Wetted Material: Stainless Steel; Carbon; Ceramic; Viton

Compliance and Restrictions

Country Of Origin

  • India

About Straight Center Centrifugal Discharge Pumps

Commonly used in industrial applications like water circulation, process applications, and irrigation, these straight center discharge pumps provide a consistent flow without requiring elevated pressure during fluid transfer. They discharge water on a straight line for streamlined flow, as opposed to pumps with a side discharge. Pumps also feature continuous-duty motors, are equipped with centerline NPT connections and drain plugs, and require a pump control box for use. Centrifugal pumps use impellers to draw in fluid, creating high velocity movement which results in a high flow rate.

Use these pumps to push high volumes of water through the system, and provide a continuous high flow rate for use in pressure boosting, spray systems, filtration, and chillers.