View Similar Products

Centrifugal Pump: Continuous Motor Duty Class, (ODP) Open Drip Proof, Closed, 3 Phase, 208-230V / 460V AC, 290 ft Max Head

Item # 385A762

Sorry, this product is currently unavailable.

Product Specs

Motor Duty Class: Continuous
Motor Enclosure: (ODP) Open Drip Proof
Impeller Design: Closed
Phase: 3
Voltage: 208-230V / 460V AC
Input Horsepower: 20 hp
Maximum Head: 290 ft
Impeller Material: Bronze
Maximum Solid Diameter: 5⁄16 in
Maximum Fluid Temperature: 212 ° F
Inlet Pipe Size: 2 in
Outlet Pipe Size: 1 1⁄2 in
Application: Booster Service; Spraying Systems; Irrigation; General Purpose Pumping; Liquid Transfer; Water Circulation
Bearing: Ball
Best Efficiency Flow Range @ Head: 120 to 240 gpm @ 280 to 210 ft
Centrifugal Pump Flow Type: Straight
Close Coupled: Yes
Control Box Included: No
Control Box Required: Yes
Current: 59.0 A/54.4 A/27.2 A
Diffuser Material: Cast Iron
Display Sell UOM: EA
Fasteners Included: No
Fasteners Required: Yes
Features: Design for Space Saving and Simplified Maintenance; Back Pull Out to Reduce Maintenance Down Time; Enclosed Impeller Design, Dynamic Balancing and Renewable Wear Rings Reduce Losses Affecting Performance and Pump Life
For Fluid Type: Water
For Use With: Nonflammable Liquids Compatible with Pump Component Materials
Handle: No
Hertz: 60 Hz
Housing Finish/Coating: E-Coat
Housing Material: Cast Iron
Inlet Center Height: 6.25 in
Inlet Center-to-Outlet Center Width: 4.5 in
Inlet Center-to-Outlet End Height: 5 in
Inlet Gender: Female
Inlet Pressure: 100 psi
Inlet Thread Size: 2 in
Inlet Type: NPT
Lead-Free: Yes
Magnetic Drive: No
Manufacturer Warranty Length: 1 yr
Maximum Case Pressure: 175 psi
Maximum Flow Rate @ Various Head: 250 gpm of Water @ 200 ft of Head; 235 gpm of Water @ 220 ft of Head; 210 gpm of Water @ 240 ft of Head
Maximum Head Pressure: 126 psi
Maximum Motor Speed: 3,500 RPM
Maximum Operating Temperature: 212 ° F
Maximum Specific Gravity: 1
Motor Electrical Connection: Bare Leads
Motor Frame Designation: 254JM NEMA
Mount Hole Bolt Diameter: 17⁄32 in
Mount Hole Center-to-Center Length: 8 1⁄4 in
Mount Hole Center-to-Center Width: 5 in
Mounting Hardware Required: Yes
Number of Inlets: 1
Number of Mount Holes: 4
Number of Outlet Positions: 1
Number of Outlets: 1
O-Ring Material: Buna-N
Outlet Gender: Female
Outlet Rotation: 90 deg
Outlet Thread Size: 1 1/2 in
Outlet Type: NPT
Overall Depth: 27 in
Overall Height: 11 1⁄4 in
Overall Width: 16 3⁄16 in
Port Rotation: Top
Portable: No
Power Source: Electric-Powered
Protection Features: Overload protection provided by starter(sold seperately)
Resistance Properties: Corrosion-Resistant
Runs Dry: No
Seal Material: Buna-N Elastomers; 316 Stainless Steel Metal Parts; Ceramic Face; Carbon Face
Seal Type: Mechanical
Service Factor: 1.15
Shaft Material: Stainless Steel
Shaft OD: 1 5⁄8 in
Specifications Met: CSA Certified; UL Certified
Submersible: No
Volute Material: Cast Iron
Wetted Material: 303 Stainless Steel; Carbon; Cast Iron; Bronze; Ceramic; Buna-N
Manufacturer Part Number: 5BF1N2A0

Compliance and Restrictions

WARNING Cancer and Reproductive Harm -

Country Of Origin

  • USA

About Self-Priming Centrifugal Pumps

Commonly used to transfer liquid from a storage tank or in dewatering applications, these self-priming pumps create a vacuum to pull fluid up from the source. They have a built-in reservoir that recirculates the fluid in the pump during the priming cycle, allowing the pump to remove air while still pumping fluid. Self-priming centrifugal pressure pumps require fluid in the reservoir for operation. They are compatible for use with non-flammable liquids and chemicals.