View Similar Products

Century Belt-Drive HVAC Motor: 56 NEMA Frame Size, 1/4 hp_3/4 hp Output Power, 2 Speeds, 208 to 230V AC, Single Phase

Item # 837R805

$414.40 Each

Product Specs

NEMA Frame Size: 56
Output Power: 1⁄4 hp; 3⁄4 hp
Number of Speeds: 2
Voltage: 208 to 230V AC
Phase: Single
Full-Load Current: 5 A; 2.7 to 2.8 A
Shaft Rotation: CW/CCW
NEMA Enclosure Type: ODP
Maximum Speed: 1,800 RPM
Application: Blowers and Belt Drive Applications; Belt-or Direct-Drive Fans; Belt Drive Applications; Ventilators; Industrial Blowers; Exhaust Fans; Furnace Blowers
Bearing Style: Ball
Body Diameter: 6.5 in
Body Length: 10.32 in
Bolt Location: Shaft End
Capacitor Included: Yes
Capacitor Required: Yes
Capacitor Type: Start
Compatible Key Stock Height: 3⁄32 in
Compatible Key Stock Width: 3⁄16 in
Current Type: AC
Dual Shaft: No
Frequency: 60 Hz
Maximum Ambient Temperature: 104 ° F
Mount Type: Cradle Base
Mounting Position: All Angle
NEMA Duty Cycle: Continuous
NEMA Insulation Class: B
NEMA Nominal Efficiency: 76 %
Nominal Speed: 1,725/1,140 RPM
Number of Bolts: 4
Overall Height: 8.29 in
Overall Length: 12.1875 in
Overall Width: 6.5 in
Resilient Ring Diameter: 2.5 in
Ring to Ring Distance: 9 13/16 in
Run Type: Capacitor
Service Factor: 1.25
Shaft Diameter: 5⁄8 in
Shaft Length: 1 7⁄8 in
Shaft Style: Keyed
Shaft to Base Distance: 3.53 in
Specifications Met: CSA Certified; UL Listed
Start Type: Capacitor Start
Thermal Protection: Automatic Reset
Manufacturer Part Number: C534V1
Voltage (MERCH): 208 to 230V AC
Motor Type: Capacitor-Start

Compliance and Restrictions

Country Of Origin

  • Mexico

About Belt Drive HVAC Motors

Power belt-driven HVAC equipment using these motors. Belt-drive motors allow you to adjust the operating speed of your equipment, making them a good choice for air coolers, roof ventilators, air circulators, and other HVAC fans and blowers. These motors are commonly used to replace worn-out or damaged motors with the same specifications.