Compact Push-to-Connect 90° Elbow: Elbow Connector, Male, 1/8 in Port 1 Tube Size, 1/8 Pipe Size (Port 2), NPT

Item # 689Z757

$2.48 Each

Product Specs

Type: Elbow Connector
Port 2 Gender: Male
Port 1 Tube Size: 1⁄8 in
Maximum Operating Pressure: 145 psi
Maximum Operating Temperature: 140 ° F
Minimum Operating Temperature: 23 ° F
Pack Qty: 1
Body Material: Plastic
Connection Type: NPT
For Tube Size: 1⁄8 in
Pipe Size: 1/8
Hex Size: 7⁄16 in
Specifications Met: JIS B0203 (Taper Thread for Piping); JIS B0205 (Metric Coarse Thread)
Thread Sealant: With Thread Sealant
Accessory Type: Male Elbow, 90 Degrees
Application: Vacuum for Actuators; Air Preparation; Directional Control Valves
Color: White/Gray
Connection: Pipe; Tubing
Display Sell UOM: EA
Features: Low Disconnecting Force Helps Prevent Collet and Chuck From Biting into and Damaging Tubing; the Body and Threaded Portion can Turn Independently of One Another for Use in Confined Spaces
Fitting Style: Elbow Connectors
For Use With: Polyurethane Tubing; Polyolefin Tubing; Nylon Tubing; PTFE Tubing
Number of Pieces: 1
OD: 10 mm
Overall Height: 20.25 mm
Overall Length: 20.055 mm
Pipe Size (Port 2): 1/8
Port 2 Connection Type: NPT
RoHS Compliant: Yes
Thread Standard: NPT
Tube ID: 1⁄8 in

Compliance and Restrictions

Country Of Origin

  • Singapore

About This Product

This Compact Push-to-Connect 90° Elbow has a male connection on port 2 and a 1/8 in port 1 tube size. It also has a 1/8 pipe size on port 2. It has a NPT port 2 connection type, which is a U. S. Standard (National Pipe Thread Tapered) that identifies a fitting with an internal thread that is tapered, which forms a seal when torqued as the flanks of the threads compress against each other. It has a 7/16 in hex size and a 145 psi maximum operating pressure. Sold individually.

About Compact Tube Protection One-Touch Fittings

Designed to prevent damage to tubing, these compact fittings have a unique collar that grips tubing without biting too deeply and allows a quick, low-force release when removed. Commonly used for actuators, air preparation equipment, and directional control valves, they seal against a wide range of pressures.

Also known as instant fittings, simply push tubing into these push-to-connect fittings and their gripping ring creates a secure, leak-free connection; no tools required. Press the ring and pull out the tubing for quick disconnection.

Make a sharp 90° change in the direction of your tubing with these 90° elbows. They have a threaded connection on one end and a tubing connection on the other.

Associated Products (2)