View Similar Products

Convertible Well Jet Pump: 1/2 hp Input Horsepower, Cast Iron, Thermoplastic, 1 Phase, 115/230V AC, 8 Vanes, Bare Leads

Item # 140X214

$424.12 Each

Product Specs

Pump Housing Material: Cast Iron
Impeller Material: Thermoplastic
Phase: 1
Voltage: 115/230V AC
Number of Vanes: 8
Input Horsepower: 1⁄2 hp
Maximum Flow Rate: 7.8 gpm
Maximum Head: 138 ft
Motor Electrical Connection: Bare Leads
Service Factor: 2.0
Maximum Fluid Temperature: 90 ° F
Includes: Pressure Gauge; Pressure Switch
Application: Shallow Well; Deep Well; Wells; Driven Well Points; Cisterns; Lakes
Bearing: Ball
Current: 10.8 A; 5.5 A
Display Sell UOM: EA
Ejector Included: No
Environment: Non-Flammable Locations
Fasteners Included: No
Fasteners Required: Yes
Features: Used for Suction Lifts of 25 Feet or Less; Convertible Jet System; Pumps Come With a Dual Voltage; Requires Ejector Sold Separately
For Ejector: 577U938; 809X803
For Fluid Type: Water
Hertz: 60 Hz
Impeller Design: Closed
Impeller OD: 4.6 in
Inlet Gender: Female
Inlet Pipe Size: 1 1⁄4
Inlet Pressure: 123 psi
Inlet Thread Size: 1 1/4 in
Inlet Type: NPT
Lead-Free: No
Manufacturer Warranty Length: 1 yr
Maximum Ambient Temperature: 104 ° F
Maximum Case Pressure: 123 psi
Maximum Discharge Pressure: 50 psi
Maximum Flow Rate @ Various Head: 7.8 gpm @ 5 ft of Head; 6.4 gpm @ 10 ft of Head; 5.1 gpm @ 15 ft of Head; 4.3 gpm @ 20 ft of Head; 2.8 gpm @ 25 ft of Head
Maximum Head Pressure: 66 psi
Maximum Motor Speed: 3,450 RPM
Maximum Operating Temperature: 90 ° F
Maximum Solid Diameter: 0.1 in
Minimum Operating Temperature: 40 ° F
Motor Duty Class: Continuous Duty
Motor Enclosure: ODP
Motor Frame Designation: 56Y
Motor Insulation Class: B
Motor Type: Capacitor Start
Mount Hole Center-to-Center Width: 4 22⁄25 in
Mounting Hardware Included: No
Not for Fluid Type: Gasoline; Flammable Fluids
Number of Inlets: 2
Number of Mount Holes: 4
Number of Outlets: 1
Number of Suction Pipes: 2
Outlet Gender: Female
Outlet Pipe Size: 1
Outlet Thread Size: 1 in
Outlet Type: NPT
Power Source: Electric-Powered
Protection Features: Motor Thermal Overload Protection with Auto Reset
Pump Depth: 14 1⁄5 in
Pump Height: 13 4⁄5 in
Pump Housing Finish/Coating: E Coating
Pump Width: 9 1⁄10 in
Runs Dry: No
Seal Material: Carbon; Ceramic
Seal Type: Mechanical
Self-Priming: Yes
Shaft Material: Stainless Steel
Shaft OD: 0.625 in
Specifications Met: CSA 249071; CUS Certified
Submersible: No
Volute Material: Cast Iron
Wetted Material: Carbon; Ceramic

Compliance and Restrictions

Country Of Origin

  • China
  • This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption).

About Convertible Jet Pumps

Capable of pumping both shallow and deep wells, these convertible, or deep well, jet pumps create a large amount of pressure by shooting water through a venturi valve to create a pressure differential, allowing these pumps to transfer a large amount of water quickly from depths of more than 25 feet and over long distances. Pair these devices with a jet pump eductor specific to your needs.

These general purpose convertible jet pumps are commonly used in residential shallow or deep wells, as well as for pumping water from a lake or pond.