|Pipe Size (Port 1):||1/2|
|Port 1 Type:||Non-Threaded|
|Pipe Size (Port 2):||1/2|
|Port 2 Type:||Non-Threaded|
|Overall Length:||10 ft|
|Maximum Operating Pressure:||850 psi|
|Specifications Met:||ASTM F441; ASTM D1784; NSF 14; NSF 61|
|Application:||Corrosive Liquids; Hot Water|
|For Substance Type:||Water|
|Maximum Operating Pressure at Temperature:||850 psi at 73° F|
|Maximum Operating Temperature:||200 ° F|
|Minimum Operating Temperature:||32 ° F|
|Port 1 Thread Size:||1/2|
|Port 2 Thread Size:||1/2|
|Resistance Properties:||Corrosion-Resistant; Chemical-Resistant; Rust-Resistant|
|Wall Thickness:||0.147 in|
Compliance and Restrictions
Country Of Origin
- This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption).
About Plastic Pipe Nipples & Pipe
In applications where rust, rot, and corrosion are a concern, choose these lightweight, lead-free plastic pipe and pipe nipples. They are commonly used in irrigation systems, food and chemical processing facilities, water mains and service lines, sewer lines, and drain, waste, and vent systems. While pipe is available in longer lengths, pipe nipples are 12" and shorter. Select a pipe or pipe nipple made from a material that is compatible with the substance to be transported through the pipes.
Pipe and pipe nipples made from CPVC (chlorinated polyvinyl chloride) are able to withstand higher temperatures than those made with PVC. They provide good resistance to a broad range of chemicals and are commonly used in indoor sprinkler systems and on hot and cold water lines in commercial and residential facilities.