View Similar Products

Electric Submersible Pump: 1/2 hp Input Horsepower, Auto, Continuous Motor Duty Class, Titanium, Plastic, 1 Phase

Item # 120R086

$1,789.11 Each

Product Specs

Operation: Automatic
Motor Duty Class: Continuous
Housing Material: Titanium
Base Material: Plastic
Phase: 1
Voltage: 230V AC
Input Horsepower: 1⁄2 hp
Max Flow Rate: 79 gpm
Max Head: 43 ft
Max Motor Speed: 3,397 RPM
Max Solid Dia: 25⁄64 in
Cord Length: 32 ft
Impeller Design: Vortex
Outlet Pipe Size: 2 in
Application: Sea Water; Wastewater Containing Seawater or Certain Chemicals
Bearing: Double Shielded Pre Lubricated Ball
Best Efficiency Flow @ Head: 50 gpm @ 21 ft of Head
Best Efficiency Flow Range @ Head: 35-65 gpm @ 27-14 ft of Head
Body OD: 9.625 in
Control Box Required: No
Cord & Plug Features: SOOW; 16/3; Oil and Water Resistant; 3-Prong Plug
Cord Type: STOW
Current: 5.8 A
Discharge Orientation: Vertical
Display Sell UOM: EA
Environment: Sump Pit
Fasteners Included: No
Fasteners Required: No
Features: Titanium and Frp Construction; Anti-Wicking Cable Entry; Motor Protector; Dual Inside Mechanical Seal; Automatic Thermal Protection; Use With Nonflammable Liquids
For Fluid Type: Seawater; Sewage; Industrial Waste Water
Handle: Yes
Handle Material: PPS plastic with GF20
Hertz: 60 Hz
Housing Finish/Coating: Uncoated
Impeller Material: Plastic
Impeller OD: 90 mm
Inlet Type: Screened
Lead-Free: Yes
Magnetic Drive: No
Manufacturer Warranty Length: 2 yr
Max Case Pressure: 28 psi
Max Flow Rate @ Various Head: 79 gpm at 5 ft of Head
Max Fluid Temperature: 104 ° F
Max Operating Temperature: 104 ° F
Max Switch-Off Level: 4.5 in
Max Switch-On Level: 23.875 in
Max Viscosity: 500 cSt
Min Opening Dia: 10 in
Min Operating Temperature: 33 ° F
Min Sump Pit Dia: 14 in
Min Switch-On Level: 14.75 in
Motor Electrical Connection: Power Cord with Plug
Motor Enclosure: (TENV) Totally Enclosed Non Ventilated
Motor Frame Designation: submersible
Motor Insulation Class: E
Motor Type: Air Filled
Mounting Hardware Included: No
Mounting Hardware Required: No
Not for Fluid Type: Flammable; Slurry
Number of Inlets: 1
Number of Outlet Positions: 1
Number of Outlets: 1
Number of Vanes: 6
O-Ring Material: Buna Rubber
Outlet Gender: Female
Outlet Thread Size: 2 in
Outlet Type: NPT
Overall Depth: 6 13⁄16 in
Overall Height: 15 1⁄4 in
Overall Width: 9 5⁄16 in
Portable: Yes
Power Source: Electric
Protection Features: Motor Thermal Overload With Auto Reset
Pump Design: Centrifugal
Resistance Properties: Corrosion-Resistant
Runs Dry: Yes
Seal Material: Silicon Carbide
Seal Type: Mechanical
Self-Priming: No
Series: VANCS
Shaft Material: Titanium
Specifications Met: cETLus by Intertek
Submersible: Yes
Switch Type: Tethered Floats (Start-Stop)
Volute Material: Abs Plastic With GF20
Wattage: 0.4 kW
Wetted Material: Titanium; ABS plastic; PPO plastic; PVC; PBT plastic

Compliance and Restrictions

Country Of Origin

  • Japan

About Sewage Pumps

Move sewage water and waste with solids up to 2" in diameter between locations using these pumps. They pump waste from the lowest area of a sewage basin, typically installed below the basement level of a facility, to a disposal line such as a septic tank or sewer line.

With a titanium housing and corrosion-resistant components, these pumps can withstand use in saltwater and other harsh environments.