|Eye Closure:||Wire Turned Closed|
|Shank Length:||3 in|
|Eye ID:||5⁄8 in|
|System of Measurement:||Imperial|
|Eye OD:||1.171875 in|
|Material Grade:||Grade 2|
|Nut Height:||0.2656 in|
|Nut Width:||0.5 in|
|Overall Length:||4.13 in|
|Screw Size:||5/16 in|
|Shank Type:||Externally Threaded|
|Thread Direction:||Right Hand|
|Thread Length:||1 1⁄2 in|
Compliance and Restrictions
Country Of Origin
About This Product
These Eye Bolts for Routing are constructed of steel, which provides strength for everyday fastening applications and is magnetic. They have a wire turned closed eye closure, which has a wire that has been bent into a loop and is suitable for light duty applications. They also don't have a shoulder, which allows the fastener to be fastened flush to the surface. They have a plain finish, which means that there is no finish on the fastener. They have a 5/16"-18 thread size. These eye bolts for routing have a 3 in shank length and are partially threaded. Pack of 5.
About Eye Bolts
Attach cable, hooks, or other hardware to the loop on these eye bolts.
Guide, retain, and tie down wires and cables with these eye bolts. They are not for lifting.