View Similar Products

Flame-Retardant Heat Shrink Tubing: Cross-Linked Polyolefin, 3:1 Shrink Ratio, 248° F Shrink Temp, Black, 10 PK

Item # 859R914

$6.59 Pack of 10

Product Specs

Color: Black
Material: Cross-Linked Polyolefin
Shrink Ratio: 3:1
Shrink Temperature: 248 ° F
ID Before Shrinking: 1.13 in
ID After Shrinking: 0.38 in
Wall Thickness After Shrinking: 0.13 in
Overall Length: 1.5 in
Minimum Operating Temperature: -67 ° F
Maximum Operating Temperature: 230 ° F
Number of Pieces: 10
Alternate Part Number: 5615B
Application: Acts as a Strain Relief Between the Cable and Connector
Features: Double Wall with Meltable Sealant; Withstands Severe Mechanical Requirements
For Maximum Bundle Diameter: 0.88 in
For Maximum Wire Size: 250 MCM
For Minimum Bundle Diameter: 0.6 in
For Minimum Wire Size: 1/0 AWG
Insulated: Yes
Insulation Material: Polyolefin
Resistance Properties: Acid Resistant; Corrosive Chemicals Resistant; Oil Resistant; Grease Resistant; Salt Resistant; Water Resistant; Abrasion Resistant
RoHS Compliant: Yes
Specifications Met: UL 486D
Tensile Strength: 10.4 MPa
Tubing Type: Heat Shrink Tubing
Voltage: 600V
Wall Type: Heavy
Wattage: Not Rated
Weight: 6.0000 g

Compliance and Restrictions

Country Of Origin

  • China

About Moisture-Resistant Adhesive-Lined Heat-Shrink Tubing

For an added layer of moisture protection compared to traditional heat-shrink tubing, this tubing has an inside layer made of adhesive that melts around wires and cables while the outer jacket shrinks to form fit the part.

Created from battery-acid resistant material, this adhesive-lined heat-shrink tubing is commonly used near battery cables and connectors.