View Similar Products

Flange-Mount Bearing Unit: Inch, Zinc Die Cast, Steel, Light Duty, Set Screw, 1 in Bore Dia, 3 7/8 in Overall Lg, Ball

Item # 463A157

$14.38 Each

Product Specs

Measurement System: Inch
Housing Material: Zinc Die Cast
Bearing Material: Steel
Duty Type: Light Duty
Locking Device: Set Screw
Bore Diameter: 1 in
Overall Length: 3 7⁄8 in
Mount Hole Center-to-Center Length: 3 in
Overall Width: 2.67 in
Dynamic Load Capacity: 3,153 lb
Maximum Operating Temperature: 200 ° F
Bearing Type: Ball
Application: General Purpose
Axial Displacement: Non-Expansion Bearing
Bearing Finish: Uncoated
Bearing Full Designation Number: F2DC-BL-100
Bearing Insert Number: B-316
Bearing Material Grade: 52100
Bolt Circle Diameter: 2.5 in
Bore Shape: Cylindrical
Fasteners Included: No
Fasteners Required: Yes
Features: Lightweight Housing; Well Suited for Applications Requiring Strong Load Support in Limited Mounting Areas
Flange Side-to-Center Width: 0.433 in
Flange Thickness: 0.5 in
Housing Color: Silver
Housing Series: F2DC-BL
Housing Type: Diamond-Shaped Flange
Includes: (2) Set Screws
Lubrication: Prelubricated - Grease
Lubrication Distribution Features: Cannot Be Relubricated
Maximum Misalignment Angle: 0 °
Maximum Speed: 3,500 RPM
Minimum Operating Temperature: -30 ° F
Mount Hole Bolt Size: 11/32"
Mount Hole Size: 11/32 in x 11/32 in
Mounting Hardware Included: No
Mounting Hardware Required: Yes
Number of Ball Rows: 1
Number of Mount Holes: 2
OD: 2.5 in
Overall Height: 1.1875 in
Precision Rating: ABEC 1
Resistance Properties: Corrosion Resistant
Ring End-to-Center Width: 0.768 in
Seal: Double-Lip
Self-Aligning: No
Static Load Capacity: 1,768 lb

Compliance and Restrictions

Country Of Origin

  • USA

About Flange-Mount 2-Bolt Mounted Bearing Units

Help prevent shafts from flexing under load with these 2-bolt flange-mount bearings. The bearing's housing has two bolt holes and attaches to a mounting surface to support a shaft that passes through the bearing at a right angle to the surface. The bearing allows the shaft to rotate smoothly while the housing helps support the load on the shaft. Two-bolt flange-mount bearings provide less support than 3- or 4-bolt bearings and are recommended for applications with light to moderate loads.

Associated Products (2)