|Shank Length:||3⁄8 in|
|System of Measurement:||Imperial|
|Head Angle:||82 °|
|Head Diameter:||0.385 in|
|Maximum Temperature:||185.0 ° F|
|Minimum Temperature:||-40.0 ° F|
|Minimum Tensile Strength:||165 psi|
|Screw Size:||No. 10|
|Thread Direction:||Right Hand|
Compliance and Restrictions
Country Of Origin
About This Product
These Flat Head Machine Screws are constructed of nylon, which is a lightweight, corrosion-resistant material commonly used in electronics applications because it is nonmagnetic and nonconductive. They have a slotted drive, which has a single slot that is driven by a flat-bladed screwdriver. They also have a 10-32 thread size and a 3/8 in shank length. They have a flat head, which is less visible than other head styles when installed because it does not protrude from the material surface. They meet IFI specifications and have an 82° head angle. Pack of 50.
About Machine Screws
The standard metal-to-metal fastener, machine screws install with a driver into a threaded hole or are inserted into a through-hole and fastened with a nut.
Countersink these flat head screws to sit flush with surfaces.