|Shank Length:||2 in|
|System of Measurement:||Imperial|
|Specifications Met:||ASME B18.6.3|
|Head Angle:||82 °|
|Head Diameter:||0.717 in|
|Head Height:||0.23 in|
|Maximum Temperature:||375 ° F|
|Minimum Temperature:||0 ° F|
|Minimum Tensile Strength:||60,000.0 psi|
|Salt Spray Results/ASTM B117:||12 Hours of Exposure No Red Rust|
|Screw Size:||3/8 in|
|Thread Direction:||Right Hand|
Compliance and Restrictions
Country Of Origin
About This Product
These Flat Head Machine Screws are constructed of steel, which is a magnetic material that provides strength for everyday fastening applications. They have a zinc plated finish, which provides mild corrosion resistance and a shiny finish. They also have a slotted drive, which has a single slot that is driven by a flat-bladed screwdriver. They have a 3/8"-16 thread size and a 2 in shank length. They have a flat head, which is less visible than other head styles when installed because it does not protrude from the material surface. They meet ASME B18.6.3 specifications. Pack of 100.
About Machine Screws
The standard metal-to-metal fastener, machine screws install with a driver into a threaded hole or are inserted into a through-hole and fastened with a nut.
Countersink these flat head screws to sit flush with surfaces.