View Similar Products

Flint & Walling Shallow Well Jet Pump & Tank System: 3/4 hp Input Horsepower, Continuous Motor Duty Class, Cast Iron

Item # 918A407

$1,179.90 Each

Product Specs

Motor Duty Class: Continuous
Pump Housing Material: Cast Iron
Phase: 1
Voltage: 115/230V AC
Impeller Design: Closed
Ejector Mounting: Built-In
Input Horsepower: 3⁄4 hp
Maximum Flow Rate: 15.5 gpm
Maximum Head: 25 ft
Motor Electrical Connection: Power Cord
Maximum Fluid Temperature: 140 ° F
Service Factor: 1
Self-Priming: No
Application: Shallow Wells
Bearing: Ball
Cord & Plug Features: No Plug
Current: 6.5 A; 13 A
Ejector Included: Yes
Environment: Indoor Use
Fasteners Included: No
Fasteners Required: Yes
Features: Pressure Switch Factory Preset to 20 to 40 psi; Spade Connectors Enable Quick Voltage Change; Certified by a Third Party to be Compliant With the Safe Drinking Water Act Requirements for Low Lead in Potable and Non-Potable Water Applications
For Fluid Type: Water
Hertz: 60 Hz
Impeller Material: Noryl
Impeller OD: 4 3⁄5 in
Includes: (1) Pump; (1) Motor; Connection Fittings From Pump to Tank; (1) Pressure Tank; (1) Ejector; (1) Pressure Switch
Inlet Gender: Female
Inlet Hose/Tube OD: 1 1⁄4 in
Inlet Pipe Size: 1 1⁄4
Inlet Type: NPT
Lead-Free: Yes
Manufacturer Warranty Length: 1 yr
Maximum Ambient Temperature: 149 ° F
Maximum Case Pressure: 150 psi
Maximum Discharge Pressure: 65 psi
Maximum Flow Rate @ Various Head: 15.5 gpm at 5 ft of Head
Maximum Head Pressure: 65 psi
Maximum Motor Speed: 3,450 RPM
Maximum Operating Temperature: 140 ° F
Maximum Viscosity: 0.89 cps
Minimum Operating Temperature: 33 ° F
Motor Enclosure: ODP
Motor Frame Designation: 56J NEMA
Motor Insulation Class: B
Motor Type: Capacitor Start
Mount Hole Bolt Diameter: 3⁄8 in
Mount Hole Center-to-Center Length: 4 in
Mount Hole Center-to-Center Width: 4 in
Mounting Hardware Included: No
Mounting Hardware Required: Yes
Not for Fluid Type: Flammable Liquids
Number of Inlets: 1
Number of Mount Holes: 4
Number of Outlets: 1
Number of Vanes: 6
Outlet Gender: Female
Outlet Hose/Tube OD: 3⁄4 in
Outlet Pipe Size: 3⁄4
Outlet Thread Size: 3/4 in
Outlet Type: NPT
Power Source: Electric-Powered
Protection Features: Thermal Overload Protection
Pump Depth: 24 in
Pump Height: 33 1⁄2 in
Pump Width: 17 1⁄4 in
Runs Dry: No
Seal Material: Buna N
Seal Type: Mechanical
Shaft Material: Stainless
Shaft OD: 5⁄8 in
Specifications Met: CSA Certified
Submersible: No
Volute Material: Noryl
Wetted Material: Cast Iron; Noryl

Compliance and Restrictions

Country Of Origin

  • USA
  • This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption).

About Shallow Well Jet Pumps

Use these shallow well jet pumps to transfer water from wells that have a vertical depth of less than 25 feet and a single pipe system, or to increase low water pressure from municipal systems. These electric-powered pumps are powered by an electric motor that drives an impeller, pushing water through a jet to create a partial vacuum. The vacuum, in turn, pulls in more water creating a flow of high-pressure water. They are mounted above the well.

Designed for home use, these devices come with a pressure tank, pump, and other needed nozzles, eductors, and fittings. The pressure tank enables your system to provide water without the pump having to turn on every time the water is turned on.