View Similar Products

Flint & Walling Single-Stage Booster Pump: 3/4 hp Input Horsepower, Continuous Motor Duty Class, Cast Iron, 1 Phase

Item # 168W890

$903.60 Each

Product Specs

Motor Duty Class: Continuous
Housing Material: Cast Iron
Phase: 1
Voltage: 115/230V AC
Input Horsepower: 3⁄4 hp
Maximum Flow Rate: 75 gpm
Maximum Head: 90 ft
Maximum Head Pressure: 32 psi
Service Factor: 1.5
Maximum Fluid Temperature: 200 ° F
Inlet Pipe Size: 1 1⁄2 in
Outlet Pipe Size: 1 1⁄4
Application: Booster Service; Water Circulation; Liquid Transfer; Cooling Systems; Jockey Pump Service; General Service in Farm, Commercial and Industrial Applications
Bearing: Ball
Best Efficiency Flow @ Head: 42 gpm @ 58 ft of Head
Close Coupled: Yes
Cord & Plug Features: No Plug
Current: 14.0 A/7.0 A
Diffuser Material: Noryl
Display Sell UOM: EA
Environment: Indoor
Fasteners Included: No
Fasteners Required: Yes
Features: Certified by a Third Party to be Compliant With the Safe Drinking Water Act Requirements for Low Lead in Potable and Non-Potable Water Applications; Discharge can be Rotated for Horizontal or Vertical Positioning
For Fluid Type: Nonflammable Fluids
Hertz: 60 Hz
Impeller Design: Closed
Impeller Material: Brass
Impeller OD: 3 1⁄3 in
Includes: (1) 1/4 in Drain Plug
Inlet Center Height: 4 13⁄16 in
Inlet Gender: Female
Inlet Thread Size: 1 1/2 in
Inlet Type: NPT
Lead-Free: Yes
Magnetic Drive: No
Manufacturer Warranty Length: 1 yr
Maximum Ambient Temperature: 149 ° F
Maximum Case Pressure: 100 psi
Maximum Discharge Pressure: 33 psi
Maximum Flow Rate @ Various Head: 19 gpm @ 69 ft; 63 gpm @ 34.5 ft; 54 gpm @ 46 ft; 40 gpm @ 58 ft
Maximum Flow Rate @ Various Pressure: 40 gpm at 25 psi; 19 gpm at 30 psi; 63 gpm at 15 psi; 54 gpm at 20 psi
Maximum Motor Speed: 3,450 RPM
Maximum Operating Temperature: 140 ° F
Maximum Self-Priming Distance: 25 ft
Maximum Viscosity: 89 cps
Minimum Operating Temperature: 33 ° F
Motor Electrical Connection: Direct Wire
Motor Enclosure: (ODP) Open Drip Proof
Motor Frame Designation: 56J NEMA
Motor Insulation Class: B
Motor Type: Capacitor Start
Mount Hole Bolt Diameter: 3⁄8 in
Mount Hole Center-to-Center Length: 4 in
Mount Hole Center-to-Center Width: 4 5⁄8 in
Mount Type: Horizontal
Mounting Hardware Included: No
Mounting Hardware Required: Yes
Not for Fluid Type: Flammable Fluids
Number of Inlets: 1
Number of Mount Holes: 4
Number of Outlet Positions: 1
Number of Outlets: 1
Number of Stages: 1
Outlet Gender: Female
Outlet Hose/Tube OD: 1 1⁄4 in
Outlet Rotation: None
Outlet Thread Size: 1 1/4 in
Outlet Type: NPT
Overall Depth: 19 1⁄2 in
Overall Height: 9 3⁄16 in
Overall Width: 8 1⁄4 in
Power Source: Electric-Powered
Protection Features: Motor Thermal Overload Protection With Auto Reset
Runs Dry: No
Seal Material: Stainless Steel; Buna-N; Carbon; Silicon Carbide
Seal Type: Mechanical Type 21
Self-Priming: No
Series: CJ103
Shaft Material: Stainless Steel
Shaft OD: 5⁄8 in
Specifications Met: CSA Certified; CUS Certified; UL Listed
Submersible: No
Volute Material: Noryl
Wetted Material: Brass; Cast Iron; 416 Stainless Steel; Buna N; Carbon; Silicon Carbide; BR

Compliance and Restrictions

Country Of Origin

  • USA
  • This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption).

About Single-Stage Booster Pumps

Use these single-stage centrifugal booster pumps when higher water pressure is needed for residential or commercial water supplies, irrigation networks, or cooling systems. They are driven by an integrated electric motor.

These pumps can be used for many standard water applications and are rated for continuous duty.