View Similar Products

Flint & Walling Single-Stage Booster Pump: Continuous Motor Duty Class, (ODP) Open Drip Proof, Closed, 1 Phase, 115/230V AC, Ball

Item # 708A732

$466.00 Each

Product Specs

Motor Duty Class: Continuous
Motor Enclosure: (ODP) Open Drip Proof
Impeller Design: Closed
Phase: 1
Voltage: 115/230V AC
Input Horsepower: 1 1⁄2 hp
Maximum Flow Rate: 75 gpm
Maximum Head: 110 ft
Impeller Material: Thermoplastic
Maximum Fluid Temperature: 140 ° F
Inlet Pipe Size: 2 in
Outlet Pipe Size: 1 1⁄2
Application: Lawn Irrigation
Bearing: Ball
Best Efficiency Flow @ Head: 45 gpm @ 88 ft of Head
Close Coupled: Yes
Cord & Plug Features: No Plug
Current: 23.2 A/11.6 A
Diffuser Material: Noryl
Environment: Indoor
Fasteners Included: No
Fasteners Required: Yes
Features: Easy Access Drain Plug
For Fluid Type: Nonflammable Fluids
Hertz: 60 Hz
Housing Material: Cast Iron
Impeller OD: 5.25 in
Includes: (1) 1/4 in Drain Plug
Inlet Center Height: 9.75 in
Inlet Gender: Female
Inlet Thread Size: 2 in
Inlet Type: NPT
Lead-Free: Yes
Magnetic Drive: No
Manufacturer Warranty Length: 1 yr
Maximum Ambient Temperature: 149 ° F
Maximum Case Pressure: 100 psi
Maximum Discharge Pressure: 47 psi
Maximum Flow Rate @ Various Head: 57 gpm @ 69 ft; 53 gpm @ 80 ft
Maximum Flow Rate @ Various Pressure: 57 gpm at 30 psi; 53 gpm at 35 psi; 44 gpm at 40 psi; 72 gpm at 10 psi; 35 gpm at 45 psi; 68 gpm at 15 psi; 65 gpm at 20 psi; 62 gpm at 25 psi
Maximum Head Pressure: 45 psi
Maximum Motor Speed: 3,450 RPM
Maximum Operating Temperature: 140 ° F
Maximum Self-Priming Distance: 25 ft
Maximum Viscosity: 89 cps
Minimum Operating Temperature: 33 ° F
Motor Electrical Connection: Direct Wire
Motor Frame Designation: 56J NEMA
Motor Insulation Class: B
Motor Type: Capacitor Start
Mount Type: Horizontal
Mounting Hardware Included: No
Mounting Hardware Required: Yes
Not for Fluid Type: Flammable Fluids
Number of Inlets: 1
Number of Mount Holes: 4
Number of Outlet Positions: 1
Number of Outlets: 1
Number of Stages: 1
Outlet Gender: Female
Outlet Hose/Tube OD: 1.5 in
Outlet Rotation: None
Outlet Thread Size: 1 1/2 in
Outlet Type: NPT
Overall Depth: 21 in
Power Source: Electric-Powered
Protection Features: Motor Thermal Overload Protection With Auto Reset
Runs Dry: No
Seal Material: Carbon; Silicon Carbide
Seal Type: Mechanical Type 21
Self-Priming: Yes
Series: SPJ
Service Factor: 1.0
Shaft Material: Stainless Steel
Shaft OD: 5⁄8 in
Specifications Met: CE Certified; UL Listed; CSA Certified
Submersible: No
Volute Material: Noryl
Wetted Material: Cast Iron; Thermoplastic

Compliance and Restrictions

Country Of Origin

  • USA

About Self-Priming Centrifugal Pumps

Commonly used to transfer liquid from a storage tank or in dewatering applications, these self-priming pumps create a vacuum to pull fluid up from the source. They have a built-in reservoir that recirculates the fluid in the pump during the priming cycle, allowing the pump to remove air while still pumping fluid. Self-priming centrifugal pressure pumps require fluid in the reservoir for operation. They are compatible for use with non-flammable liquids and chemicals.