View Similar Products

General Purpose Oil-Resistant Buna-N O-Ring: 236 AS568 Dash, X-Shape, Black, 0.139 in Actual Wd, 70 Shore A, 10 PK

Item # 282X232

$7.62 Pack of 10

Product Specs

Cross Section Shape: X-Shape
Color: Black
Actual Width: 0.139 in
Nominal Width: 1⁄8 in
Minimum Operating Temperature: -30 ° F
Maximum Operating Temperature: 250 ° F
Material: Buna-N
AS568 Dash Number: 236
Actual ID: 3.234 in
Nominal ID: 3 1⁄4 in
Hardness Rating (Durometer): Medium
Durometer: 70 Shore A
Package Quantity: 10
Measurement System: Inch
Resistance Properties: Transmission Fluid Resistant; Hydraulic Fluid Resistant; Alkali Resistant; Acid Resistant; Petroleum Oil Resistant; Silicone Lubricant Resistant; Water Resistant
Actual OD: 3.512 in
Application: Hydraulics; Fluids; Lawn & Garden; Automotive; Air-Powered Machines; Connections; Machines; Sprayers; Engines; Faucets; Valves; Gas
For Use With: Gas; Fluids; Hydraulics
Maximum ID Tolerance: 0.024 in
Minimum ID Tolerance: -0.024 in
Nominal OD: 3 1⁄2 in
Pack Unit: PK
RoHS Compliant: Yes
Specifications Met: SAE J200; ASTM D2000

Compliance and Restrictions

Country Of Origin

  • China

About This Product

These General Purpose Oil-Resistant Buna-N O-Rings have an AS568 dash number of 236. They have an x-shaped cross section shape, which has four concave sides that provide a higher area of sealing for a more stable seal than round O-rings. They are black and have a 0.139 in actual width. They have a 1/8 in nominal width and a 3.234 in actual ID. They have a nominal ID of 3 1/4 in. Pack of 10.

About General Purpose O-Rings

Take on a range of tasks such as sealing faucets, valves, and flanges with these multipurpose O-rings. They are available in different elastomers to provide the chemical resistances and physical properties needed for your application. All inch sizes conform to AS568 standards for dimensions and tolerances.

With excellent resistance to petroleum oils and gasoline, these Buna-N O-rings are a good choice for general use and low-pressure hydraulic and pneumatic seals. Buna-N, also known as nitrile rubber, is a strong, abrasion-resistant material that also offers good compression set resistance to minimize loss of resiliency.

Associated Products (2)