Harrington Continuous-Duty Harsh-Environment Electric Chain Hoist: 15 ft Lift, 208/230/460V AC, 4000 lb Max Load Capacity

Item # 151W517

$4,622.64 Each
Lift: 15 ft

Product Specs

Voltage: 208/230/460V AC
Maximum Load Capacity: 4,000 lb
Maximum Lift Speed: 14 ft/min
Current @ Low Voltage: 8.6 A
Minimum Clearance: 22 5⁄8 in
Hook Opening Width: 1 19⁄32 in
Lift: 15 ft
Lift Type: Chain
Hoist Service Classification: H4
Application: Indoor; Outdoor
Body Color: Yellow
Body Finish/Coating: Electrostatic Enamel
Body Material: Aluminum
Brake Type: DC Current
Chain Finish/Coating: Nickel Plated
Chain Grade: Grade 80
Chain Material: Alloy Steel
Clutch Type: Friction
Controller Cord Length: 11 ft
Controller Voltage: 110 V AC
Duty Rating: Continuous Duty
Features: Hook Mounted Configuration; Reduces Chain Vibration; Low Profile; Upper and Lower Limit Switches; Thermal Protection; Oil Bath Lubrication
Hook Color: Yellow
Hook Material: Carbon Steel
Hook Type: Safety Latch
Horsepower: 2.4 hp
Includes: Limit Switches; (1) Plug-in Connections; (1) Chain Container
Number of Load Chains: 1
Number of Reeves: 1
Number of Speeds: 1
Operating Position: Vertical
Overall Depth: 9 1⁄2 in
Overall Length: 25 1⁄2 in
Overall Width: 16 7⁄8 in
Overload Protection Included: Yes
Phase: 3
Power Cord Length: 15 ft
Resistance Properties: Corrosion-Resistant Load Chain
Specifications Met: NFPA 70; ASME HST-1; ASME B30.16

Compliance and Restrictions

Country Of Origin

  • Japan

About Electric Hoists

Reduce effort and increase the speed of positioning and maneuvering tasks with the motorized lifting action of these electric-powered hoists. Electric hoists are commonly used in areas where quick, frequent lifting is required, such as in warehouses, production lines, and in maintenance work. They require an outside power source for operation.

Tackle the toughest industrial lifting applications in harsh indoor or outdoor environments with these H4-rated electric hoists. The fan-cooled motor has a 60-minute duty rating and can handle up to 300 starts and stops per hour, which are counted with an on-board meter. Hoists have durable alloy steel gears as well as an oil-bath transmission that helps keep components lubricated to reduce heat and friction that can wear down parts. Upper- and lower-limit switches and a braking system help ensure that you have control over the load. The fully-sealed body and corrosion-resistant load chain allow the hoists to be used in areas where they're exposed to some liquids. These hoists meet specification ASME/ANSI B30.16.