View Similar Products

Heat-Welded Felt Filter Bag: 200 micron Filter Rating, 1 Filter Bag Size, 55 gpm Max Flow, 2 sq ft Area, 20 PK

Item # 341K440

$104.54 Pack of 20

Product Specs

Filter Rating: 200 micron
Filter Bag Size: 1
Max Flow: 55 gpm
Area: 2 sq ft
Diameter: 7 1⁄16 in
Overall Height: 16 1⁄2 in
Collar Type: Handle and Ring
Seam Type: Welded
Finish/Coating: Glazed
Material: Polyester
Maximum Operating Temperature: 250 ° F
Features: High-Flow Felt Filter Bags_x000D_; Single-Layer Bags are Ideal for High Flow Rates; Handle and Ring Sewn in At Top Allow Easy Filter Changes; Heat Welded Seams; Glazed Finish for Low Fiber Migration, Good Depth Filtration, and Good Solids-Holding Capacity; Initial Pressure Drop: Less Than 0.5 Psi for Maximum Rated Flow At 68 °F
For Use With: Vegetable Oils; Organic Acids; Mineral Acids; Size 1 Bag Housings; Alkalies; Organic Solvents; Petroleum
Pack Qty: 20
Pack Unit: PK
Reduces: Solids; Sediment
Ring Material: Galvanized Carbon Steel

Compliance and Restrictions

Country Of Origin

  • Mexico

About Filter Bags & Magnets

Place filter bags in a compatible housing to remove particles from water and liquids without drastically impeding flow. They can usually be cleaned and reused, but if they need to be discarded, they create less waste than cartridges.

The filter rating, expressed in microns, indicates the smallest particle a filter can capture. The smaller the filter rating, the finer the particles the filter can capture. For example, lead dust is about 2 microns, hair is about 50 microns, and sand ranges from roughly 100 to 1,000 microns.

These felt filter bags have heat-welded seams and a glazed surface that prevents the bag's fibers from mixing with the filtered material.