View Similar Products

HVAC Circulating Pump: 1/8 hp Input Horsepower, Continuous Motor Duty Class, Open, Stainless Steel, 1 Phase, 115V AC

Item # 896W815

$252.11 Each

Product Specs

Motor Duty Class: Continuous
Loop Type: Open
Housing Material: Stainless Steel
Phase: 1
Voltage: 115V AC
Input Horsepower: 1⁄8 hp
Maximum Flow Rate: 64 gpm
Maximum Head: 42 ft
Inlet Pipe Size: 1 1/4 in
Inlet Type: Flanged
Maximum Fluid Temperature: 230 ° F
Maximum Motor Speed: 3,600 RPM
Adjustable Flow: Yes
Application: Hydronic Heating Systems; Hot Water Circulation
Bearing: Ceramic Self-Aligning Ball
Best Efficiency Flow at Head: 8 gpm @ 10 ft of Head
Cord & Plug Features: No Plug
Current: 0.81 A
Display Sell UOM: EA
Drive Type: Direct
Environment: Indoor Only
Fasteners Included: Yes
Fasteners Required: Yes
Features: 30% Glass Filled Impeller Material; It is Ideal for Open Systems Such as Domestic Hot Water Recirculation or Pressure Boosting
Flange Bolt Circle Diameter: 3 5⁄32 in
Flange Bolt Hole Diameter: 1⁄2 in
Flange Center-to-Center Width: 6 19⁄50 in
Flange Included: No
Flange OD: 4 1⁄4 in
Flange Shape: Round
Flow Adjustment Percentage: +/- 26%
Flow Rate at Various Head: 8 gpm @ 10 ft of Head; 0 gpm @ 18 ft of Head; 18 gpm @ 1 ft of Head
For Chemical Type: Propylene); 50% Glycol Mixture (Ethylene
For Fluid Type: Water
Hazardous Location Classification: Not Rated
Hertz: 60 Hz
Housing Finish/Coating: Uncoated
Impeller Design: Open
Impeller Material: Noryl(R)
Impeller OD: 2.4 in
Includes: (2) gaskets; Circulator Pump
Inlet to Outlet Length: 6.38 in
Lead-Free: Yes
Magnetic Drive: No
Manufacturer Warranty Length: 2 yr
Maximum Ambient Temperature: 104 ° F
Maximum Operating Pressure: 150 psi
Maximum Operating Temperature: 230 ° F
Minimum Flow Rate at Head: 0 gpm @ 18 ft of Head
Minimum Fluid Temperature: 40 ° F
Minimum Operating Temperature: -20 ° F
Motor Electrical Connection: Lever Terminal Strip
Motor Enclosure: OPD
Motor Insulation Class: A
Motor Mount: In Line
Motor Type: Induction Motor
Mount Type: Vertical
Mounting Hardware Included: No
Mounting Hardware Required: Yes
Not for Chemical Type: All
Not for Fluid Type: All Except Water and Glycol Mixtures
Number of Flange Bolt Holes: 2
Number of Speeds: 3
Outlet Pipe Size: 1 1/4 in
Outlet Type: Flanged
Overall Depth: 5 in
Overall Height: 6 3⁄8 in
Overall Width: 6 in
Power Source: Electric-Powered
Protection Features: Thermal Protection
Pump Construction: One-Piece
Pump Type: Maintenance Free; Wet Rotor
Replaceable Cartridge: No
Rotor Design: Wet
Runs Dry: No
Seal Type: Mechanical
Series: ASTRO 230
Service Factor: 1
Shaft Material: Ceramic
Shut-Off: 17 ft
Specifications Met: ETL Listed; UL Listed; CSA Certified; NSF 372
Union Included: No
Volute Material: EPDM
Wetted Material: Stainless Steel; Ceramic; EPDM; Noryl

Compliance and Restrictions

Country Of Origin

  • China
  • This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption).

About HVAC Circulating Pumps

Move liquid, air, or gas through your closed loop heating or cooling system at a consistent rate with these centrifugal-style pumps. Commonly used in light commercial and residential applications for air conditioning, refrigeration, or hydronic underfloor heating, these pumps are compact and install in-line on piping systems.

Reduce maintenance with wet rotor pumps that are designed to self-lubricate and self-cool with the pumped water, eliminating the need for oil. They are sealless, reducing the possibility of leaks and eliminating the need for mechanical seal changes, and they don't have a fan, resulting in little to no noise during operation.