DIN Rail: 39.375 in Overall Lg, 1.38 in Overall Wd, Aluminum
IEC Contactor: 3 Poles, Single/Three Phase, 12 A Current Rating, 240V AC Control Volt, 1 hp - Single Phase @ 120V
Item # 996X021
$38.89 Each
Product Specs
| Number of Poles: | 3 |
|---|---|
| Phase: | Single/Three |
| Current Rating: | 12 A |
| Control Voltage: | 240V AC |
| Auxiliary Contact Pole-Throw Configuration: | 1NO |
| HP - Single Phase @ 120V: | 1 hp |
| HP - Three Phase @ 240V: | 3 hp |
| Reversing: | No |
| Phase: | Single; Three |
| HP - Single Phase @ 240V: | 2 hp |
| HP - Three Phase @ 480V: | 7 1⁄2 hp |
| HP - Three Phase @ 600V: | 10 hp |
| Alternate Part Number: | TC1D1210U7 |
| Application: | Motor Loads |
| Auxiliary Contact Material: | Silver Alloy |
| Connection Type: | Screw Terminal |
| Contactor Type: | Motor Duty |
| Current - Resistive: | 25 A |
| Current Type: | AC |
| Electrical Operating Life Cycles: | 1,200,000 |
| HP - Three Phase @ 208V: | 3 hp |
| IP Rating: | 20 |
| Latching: | No |
| Maximum Operating Temperature: | 104 ° F |
| Mechanical Operating Life Cycles: | 2,000,000 |
| Minimum Operating Temperature: | 23 ° F |
| Mounting: | DIN Rail/Screw |
| Operating Frequency: | 50 Hz; 60 Hz |
| Output Current - Inductive: | 12 A |
| Output Current - Resistive: | 25 A |
| Output Power - Single Phase: | 1 hp @ 120V AC; 2 hp @ 240V AC |
| Output Power - Three Phase: | 3 hp @ 208V AC; 3 hp @ 240V AC; 7 1/2 hp @ 480V AC; 10 hp @ 600V AC |
| Output Voltage: | 690V AC |
| Overall Height: | 1.77 in |
| Overall Length: | 3.18 in |
| Overall Width: | 1.77 in |
| Power Consumption: | 8 VA |
| Primary Contact Material: | Silver Alloy |
| Primary Contact Pole-Throw Configuration: | TPST |
| RoHS Compliant: | No |
| Sealing: | Semi-Sealed |
| Specifications Met: | UL 508; CSA; IEC |
| Switching Current: | 12 A |
| Switching Voltage: | 600V AC |
Compliance and Restrictions
WARNING Cancer and Reproductive Harm - www.p65warnings.ca.gov
Country Of Origin
- India
About IEC Contactors
Choose IEC contactors to fit a specific application and load requirement. These contactors conform to International Electrotechnical Commission (IEC) standards. They are compact in size and can be mounted on DIN rails.
Associated Products (1)