View Similar Products

IEC Contactor: 3 Poles, Single/Three Phase, 18 A Current Rating, 120V AC Control Volt, 1 hp - Single Phase @ 120V

Item # 907X415

$128.15 Each

Product Specs

Number of Poles: 3
Phase: Single/Three
Current Rating: 18 A
Control Voltage: 120V AC
Auxiliary Contact Pole-Throw Configuration: 1NO
HP - Single Phase @ 120V: 1 hp
HP - Three Phase @ 240V: 5 hp
Reversing: Yes
Phase: Single; Three
HP - Single Phase @ 240V: 3 hp
HP - Three Phase @ 480V: 10 hp
HP - Three Phase @ 600V: 15 hp
Alternate Part Number: TC2D1810G7
Application: Motor Loads
Auxiliary Contact Material: Silver Alloy
Connection Type: Screw Terminal
Contactor Type: Motor Duty
Current - Resistive: 32 A
Current Type: AC
Electrical Operating Life Cycles: 1,200,000
HP - Three Phase @ 208V: 5 hp
IP Rating: 20
Latching: No
Maximum Operating Temperature: 104 ° F
Mechanical Operating Life Cycles: 2,000,000
Minimum Operating Temperature: 23 ° F
Mounting: DIN Rail/Screw
Operating Frequency: 60 Hz; 50 Hz
Output Current - Inductive: 18 A
Output Current - Resistive: 32 A
Output Power - Single Phase: 1 hp @ 120V AC; 3 hp @ 240V AC
Output Power - Three Phase: 5 hp @ 208V AC; 5 hp @ 240V AC; 10 hp @ 480V AC; 15 hp @ 600V AC
Output Voltage: 690V AC
Overall Height: 4.17 in
Overall Length: 3.4 in
Overall Width: 4.17 in
Power Consumption: 8 VA
Primary Contact Material: Silver Alloy
Primary Contact Pole-Throw Configuration: TPST
RoHS Compliant: No
Sealing: Semi-Sealed
Specifications Met: UL 508; IEC; CSA
Switching Current: 18 A
Switching Voltage: 600V AC

Compliance and Restrictions

This product contains a chemical that is regulated under California Proposition 65.
  • Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
  • Warning: This product contains a chemical known to the State of California to cause cancer.

Country Of Origin

  • India

About IEC Contactors

Choose IEC contactors to fit a specific application and load requirement. These contactors conform to International Electrotechnical Commission (IEC) standards. They are compact in size and can be mounted on DIN rails.