View Similar Products

IEC Contactor: 3 Poles, Single/Three Phase, 95 A Current Rating, 120V AC Control Volt, 7 1/2 hp - Single Phase @ 120V

Item # 922U585

$383.50 Each

Product Specs

Number of Poles: 3
Phase: Single/Three
Current Rating: 95 A
Control Voltage: 120V AC
Auxiliary Contact Pole-Throw Configuration: 1NC/1NO
HP - Single Phase @ 120V: 7 1⁄2 hp
HP - Three Phase @ 240V: 25 hp
Reversing: No
Phase: Single; Three
HP - Single Phase @ 240V: 15 hp
HP - Three Phase @ 480V: 60 hp
HP - Three Phase @ 600V: 60 hp
Alternate Part Number: TC1D9511G7
Application: Motor Loads
Auxiliary Contact Material: Silver Alloy
Commodity Code: Not Rated
Connection Type: Screw Terminal
Contactor Type: Motor Duty
Current - Resistive: 110 A
Current Type: AC
Electrical Operating Life Cycles: 1,200,000
Features: Not Rated
HP - Three Phase @ 208V: 20 hp
IP Rating: 20
Latching: No
Maximum Operating Temperature: 104 ° F
Mechanical Operating Life Cycles: 2,000,000
Minimum Operating Temperature: 23 ° F
Mounting: DIN Rail/Screw
Number of Auxiliary Contacts: Not Rated
Operating Frequency: 50 Hz; 60 Hz
Output Current - Inductive: 95 A
Output Current - Resistive: 125 A
Output Power - Single Phase: 7 1/2 hp @ 120V AC; 15 hp @ 240V AC
Output Power - Three Phase: 20 hp @ 208V AC; 25 hp @ 240V AC; 60 hp @ 480V AC; 60 hp @ 600V AC
Output Voltage: 690V AC
Overall Height: 3.34 in
Overall Length: 4.96 in
Overall Width: 3.34 in
Power Consumption: 26 VA
Primary Contact Material: Silver Alloy
Primary Contact Pole-Throw Configuration: TPST
RoHS Compliant: No
Sealing: Semi-Sealed
Specifications Met: CSA; IEC; UL 508
Switching Current: 95 A
Switching Voltage: 600V AC

Compliance and Restrictions

This product contains a chemical that is regulated under California Proposition 65.
  • Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
  • Warning: This product contains a chemical known to the State of California to cause cancer.

Country Of Origin

  • India

About IEC Contactors

Choose IEC contactors to fit a specific application and load requirement. These contactors conform to International Electrotechnical Commission (IEC) standards. They are compact in size and can be mounted on DIN rails.

Associated Products (1)