|For Bore Diameter:||2 7⁄16 in|
|For Groove Diameter:||2.584 in|
|For Groove Width:||0.086 in|
|Ring Free OD:||2.702 in|
|Ring Thickness:||0.078 in|
|Lug Height:||0.28 in|
|System of Measurement:||Imperial|
|Specifications Met:||ASME B18.27.1|
|Compressed Clearance Diameter:||1.86 in|
|For Groove Depth:||0.072 in|
|Plier Hole Diameter:||0.11 in|
|Released Clearance Diameter:||2 in|
|Section Width Maximum:||0.209 in|
|Section Width Minimum:||0.103 in|
|Tensile Strength:||150,000 psi|
Compliance and Restrictions
Country Of Origin
About This Product
This Internal Retaining Ring is constructed of stainless steel, which has a naturally corrosion-resistant surface that continues to protect the material from environmental contaminants even if scratched. It has a passivated finish, which describes stainless steel that has had surface contaminants removed to increase the natural corrosion resistance of the material. It has a HO-243 Ring Number and is used with 2 7/16 in diameter bores. It is used with 2.584 in diameter grooves and 0.086 in width grooves. It has a 2.702 in free outside diameter. Sold individually.
About Internal Retaining Rings
Mount these internal retaining rings into the bore of a shaft or housing to form a shoulder that holds components in place.
Compress the lugs of these rings with retaining ring pliers and slide the ring into a bore.