View Similar Products

Liberty Sink Drain Pump System: Auto, Continuous Motor Duty Class, Aluminum, Thermoplastic, 1 Phase, 115V AC, Vortex

Item # 452A033

$228.90 Each

Product Specs

Operation: Automatic
Motor Duty Class: Continuous
Pump Housing Material: Aluminum
Pump Base Material: Thermoplastic
Phase: 1
Voltage: 115V AC
Input Horsepower: 1⁄3 hp
Max Flow Rate: 30 gpm
Max Head: 21 ft
Max Head Pressure: 9.1 psi
Basin Capacity: 4.3 gal
Basin Height: 11 3⁄10 in
Impeller Design: Vortex
Outlet Pipe Size: 1 1⁄2
Adjustable Switch Levels: Yes
Application: Basement Remodeling Projects; Washing Machines; Bar Sinks; Laundry Tray Sinks; Gray Waste Water Applications
Basin Depth: 13 7⁄10 in
Basin Material: Polyolefin
Basin OD: 13.75 in
Basin Shape: Hexagonal
Basin Width: 14.75 in
Bearing: Race Type; Single Ball
Check Valve Included: No
Control Panel Monitor Included: No
Cord & Plug Features: Water Tight Compression Fitting Cord Plate Assembly; Multi-Conductor Power Cord; Piggyback Style Plug; SJTW
Cord Length: 10 ft
Cover Included: Yes
Cover Material: Polypropylene
Current: 5 A
Display Sell UOM: EA
Environment: Basements; Laundry Tubs; Under Sink
Features: Quicktree Technology Provides a Separate Access Cover for Easy Switch Inspection; Built to Perform in High-Head, High Temperature Situations
Float Material: PVC
For Fluid Type: Water
Hertz: 60 Hz
Impeller Material: Polymer
Inlet Gender: Female
Inlet Hose/Tube ID: 1.5 in
Inlet Pipe Size: 1 1⁄2
Inlet Thread Size: 1 1/2 in
Inlet Type: NPT
Lead-Free: No
Manufacturer Warranty Length: 3 yr
Max Ambient Temperature: 221 ° F
Max Flow Rate @ Various Head: 25 gpm at 10 ft of Head; 30 gpm at 5 ft of Head; 15 gpm at 15 ft of Head; 4 gpm at 20 ft of Head
Max Fluid Temperature: 140 ° F
Max Motor Speed: 3,450 RPM
Max Operating Temperature: 266 ° F
Max Solid Dia: 3⁄8 in
Max Switch-Off Level: 3 1⁄4 in
Max Switch-On Level: 8 1⁄8 in
Min Operating Temperature: 32 ° F
Motor Electrical Connection: Power Cord
Motor Enclosure: Open
Motor Insulation Class: B
Motor Type: Permanent Split Capacitor
Mount Location: Above Floor
Mounting Hardware Included: No
Mounting Hardware Required: No
Not for Fluid Type: Abrasive Fluids; Flammable Fluids; Gasoline; Oil; Chemicals; Trash Water; Solids
Number of Cord Access Holes: 1
Number of Inlets: 1
Number of Outlets: 1
Number of Vents: 1
Outlet Gender: Female
Outlet Hose/Tube ID: 1.5 in
Outlet Thread Size: 1 1/2 in
Outlet Type: NPT
Power Source: Electric-Powered
Protection Features: Engineered Double Lip Seal With Stainless Steel Springs; Sealed Cord Entry Plate With Molded Pins; Integral Thermal Overload Switch
Pump Depth: 7 1⁄10 in
Pump Height: 10 1⁄2 in
Pump Housing Finish/Coating: Powder Coat
Pump Seal Material: Buna N
Pump Seal Type: Double Lip
Pump Width: 9 7⁄10 in
Runs Dry: No
Screened Intake: Yes
Self-Priming: No
Service Factor: 1
Shaft Material: Stainless Steel
Specifications Met: UL Approved; CSA
Submersible: Yes
Switch Connection-to-Pump: Separate
Switch Type: Wide Angle Float
Vent Dia: 1 1⁄2 in
Water Removal Depth: 3.25 in
Wetted Material: Poly; Aluminum
Manufacturer Part Number: 404

Compliance and Restrictions

Country Of Origin

  • USA

About Wastewater Sump Pump Systems

For an all-in-one solution for moving water and wastewater from one location to another, use these assembled sump pump systems that include a pump and basin. Also known as sump or sewage systems, these products are used to prevent flooding, provide drainage, or move waste in residential, commercial, and light industrial applications. These systems do not rely on gravity to move liquids, and can be installed below the drain line.