Linear Actuator: 12V DC Input Volt, 675 lb Load Capacity, 12 in Stroke Lg, 19.4 in Retracted Lg, 10 A Current

Item # 981R848

$188.60 Each

Product Specs

Input Voltage: 12V DC
Load Capacity: 675 lb
Stroke Length: 12 in
Retracted Length: 19.4 in
Current: 10 A
Speed at Rated Load: 13 in/min
Duty Cycle: 17 %
Overall Width: 3.35 in
Housing Material: Die Cast Aluminum
Limit Switch: Yes
Mount Type: Female Clevis
Capacitor Included: Yes
Capacitor Required: Yes
Clutch Included: No
Cooling: Nonventilated
Duty Type: Commercial
Features: Self Locking Acme Screw to Prevent Back Driving; Adjustable Limit Switch
Height to Mount Center: 4.53 in
Maximum Ambient Temperature: 120 ° F
Motor Type: Permanent Magnet
Pack Qty: 1
Pack Unit: EA
Rotary Drive: Gear Driven
Safety Features: AC Motor Thermal Protection to Prevent Over Heating
Specifications Met: UL Recognized; CE Compliant
Totally Enclosed Motor: Yes

Compliance and Restrictions

Hazardous material - General
Hazardous material - General

Country Of Origin

  • China

About Commercial-Duty Rod-Style Electric Actuators

The internal limit switch on these electric actuators helps prevent overload and can be adjusted for precise positioning. Designed for low duty cycles in commercial environments, these rod-style actuators have external rods that deliver thrust to push or pull loads. They're often used in place of hydraulic or air cylinders because they allow more precise positioning, run more quietly, and don't contain potentially hazardous fluids, but they're not suited for hazardous environments or continuous operation applications.

The duty cycle rating is the amount of time per operating cycle at the rated load that the actuator spends extending and retracting ("on" time) versus the time it rests ("off" time). Typically expressed as a percentage of "on" time, a duty cycle of 33% for a 60 second cycle would spend 20 seconds on and 40 seconds off.

Mount these female-threaded actuators with clevis pins.