View Similar Products

Marathon Hazardous Location Motor For Class 1 Gas Group C & D or Class 2 Group E, F, & G Locations: 1 C, D / 2 E, F, G Haz Location Class, Three Phase

Item # 326K002

$368.40 Each

Product Specs

Brand: Marathon
Hazardous Location Class: 1 C, D / 2 E, F, G
Output Power: 1/3 hp
Nameplate RPM: 1,725 RPM
Phase: Three
Voltage: 230V AC; 460V AC
Frequency: 50 Hz; 60 Hz
Current: 1.2 A; 0.6 A
Motor Type: Three-Phase
NEMA Frame Size: 56
NEMA Enclosure Type: TENV
Thermal Protection: Automatic Reset
Service Factor: 1
NEMA Duty Cycle: Continuous
NEMA Insulation Class: B
Maximum Ambient Temperature: 40 ° C
Bearings: Ball
NEMA Nominal Efficiency: 74.5 %
NEMA Torque Designation: Design B
Shaft Rotation: CW/CCW
Temperature Code: T3B
Mounting Style: Rigid Base
Motor Mounting Position: Horizontal
Shaft Design: Keyed
Application: Hazardous Location
Includes: (1) Leads Through 1 in NPT Nipple; (1) Conduit Box
Overall Length: 11 1⁄8 in
Body Length: 9 1⁄4 in
Shaft Diameter: 5⁄8 in
Shaft Length: 1 7⁄8 in
Compatible Key Stock Width: 3⁄16 in
Compatible Key Stock Height: 3⁄32 in
Lead Length: 6 in
Frame Material: Rolled Steel
Specifications Met: CSA LR47504; UL E12044

Compliance and Restrictions

Country Of Origin

  • USA

About This Product

This Marathon Hazardous Location Motor For Class 1 Gas Group C & D or Class 2 Group E, F, & G Locations is 1 C, D / 2 E, F, G, which is a rating that indicates the product meets safety standards for use in atmospheres with a high presence of gaseous elements such as ethylene, gasoline, and ethanol and in areas where dust from materials such as coal, grain, flour, and metals are present. It's three phase, which describes mechanical energy generated in three overlapping phases for high efficiency. It has a rigid base mounting style, which is a motor frame type with a bracket at the base of the frame for mounting the motor. It also has a 1/3 hp output power and a 1725 RPM nameplate RPM rating. It has the following voltage ratings: 230V AC and 460V AC. It has a 56 NEMA frame size. Sold individually.

About Hazardous Location Motors

Help reduce risks associated with using motors in areas where explosive materials may exist with these hazardous location motors. Electrical equipment such as motors can ignite vapors, dust, and gases in the atmosphere, causing an explosion. These motors meet Underwriters Laboratories standards for equipment used in Division 1 hazardous areas such as gas plants, gas stations, chemical plants, cleaning facilities, or grain storage facilities. They are commonly used to replace existing motors with the same specifications on equipment such as fans, blowers, conveyors, and material handling machinery.

Use these motors to replace worn-out or damaged motors on equipment used in hazardous locations. The motors meet Class 1 Gas Groups C and D standards for use in atmospheres with a high presence of elements such as ethylene, gasoline, and ethanol. They also meet Class 2 Groups E, F, and G standards for use in areas where dust from materials such as coal, grain, flour, and metals like aluminum and magnesium may be present.